shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • This stylish range of stainless-steel water coolers is the perfect addition to a modern kitchen, spacious living room or small office.

    • Stylish stainless steel housing
    • External heating element offers greater efficiency and avoids calcium build up
    • Durable polypropylene, self-closing taps
    • Food-grade, stainless steel water contact tubes
    • Easy-to-clean, removable drip tray and non-spill system
    • 12-month standard warranty and 36-month compressor warranty

    Bottled Water Cooler Mains Connected Water Cooler

    Original price was: $446.25.Current price is: $381.00. ex. GST

    15% Off

    Add to cart
  • The Odyssey Series offers unrivalled value in bottled ambient and cold drinking water dispensers. The modern cooler is the perfect unit for family homes, renters and small offices all year round.

    • Stylish front facade made from high quality durable plastic, coupled with steel side panels for strength
    • Easy-to-use taps, only one hand required
    • Food-grade, stainless steel water contact tubes
    • Durable polypropylene, self-closing taps
    • Easy-to-clean, removable drip tray
    • 12 month standard warranty and additional 24 month refrigeration system coverage
    • Full range of replacement parts

    ODYBCC-WHT ODYBCC-BLK

    $249.90 ex. GST

  • The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
    • 4L internal water storage tank
    • 10L eco-friendly refillable filtered bottle.
    • Heavy-duty stainless steel side panels
    • Durable, self-closing taps
    • Easy-to-clean, removable drip tray

    WATER RESERVOIRCold: 4 L
    HOUSING MATERIALPlastic with stainless steel side panels and corner pieces
    REFRIGERATIONUses R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 5 L/h
    ELECTRICAL POWER USECold: 100 W
    ELECTRICAL 220-240V, 50/60Hz
    WARRANTY12-month comprehensive coverage, additional 24-month compressor replacement

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $420.00.Current price is: $365.00. ex. GST

    13% Off

    Add to cart
  • The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
    • 2.0L/h hot water heating capacity
    • 4L internal water storage tank
    • 10L eco-friendly refillable filtered bottle.
    • Heavy-duty stainless steel side panels
    • Durable, self-closing taps
    • Stainless steel housing
    • Easy-to-clean, removable drip tray

    WATER RESERVOIRCold: 4L     |     Hot 1.2L
    HOUSING MATERIALPlastic with stainless steel side panels and corner pieces
    REFRIGERATIONUse R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 5L/h     |     Hot 2L/h
    ELECTRICAL POWER USECold: 100W     |     Hot 400-800W
    ELECTRICAL220,240 V, 50/60 Hz
    WARRANTY12-month comprehensive coverage, additional 24-month compressor replacement.

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $450.00.Current price is: $395.00. ex. GST

    12% Off

    Add to cart
  • The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • Cold water chills to approx. 5°C
    • Stylish front façade made from high quality durable plastic, coupled with steel side panels for strength
    • Compact design, ideal for homes, apartments, home offices and more.
    • Easy-to-use taps, only one hand required
    • Food-grade, stainless steel tank and water contact tubes
    • Durable polypropylene, self-closing taps
    • Easy-to-clean, removable drip tray
    • 12-month standard warranty and additional 24-month refrigeration system coverage
    • Full range of replacement parts

    WATER RESERVOIRCold: 2.5L
    HOUSING MATERIALHigh-quality durable plastic with steel side panels
    REFRIGERATIONUsed R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 2.5 L/h
    POWER CONSUMPTIONCold: 85W
    ELECTRICAL220-240V, 50/60Hz
    WEIGHT (PACKED)10 kg
    DIMENSIONS (PACKED) 535 x 360 x 290 mm (HxWxD)
    WARRANTY12-month comprehensive coverage. Additional 24-month refrigeration system coverage.

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to direct sunlight or other sources of heat.
    3. It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10 cm of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of your water cooler.

    Install

    1. Make sure the water dispenser is not plugged into an electrical outlet.
    2. Remove the bottle support by twisting in the direction specified to access tank
    3. Flush tank with water and wipe with soft cloth
    4. Insert the water bottle vertically on the bottle support/spike of the water dispenser.
    5. Wait until the tanks fill with water. Press the cold water tap down until water begins to flow. Press the hot water tap (if applicable) down until water begins to flow.
    6. Flush through 5L of water to ensure lines are cleaned. More may be required if taste is strange. Once flushed, ensure the cooler tanks are full of water before moving to step 7.
    7. Insert the power plug into an electrical outlet.
    8. Turn the electric switches to ON position to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME. ENSURE STEP THREE IS COMPLETED FIRST
    9. Indicator lights on front should light up. The appliance is designed to provide water whenever you need it. It will automatically turn on and off when the water reaches the desired temperatures. The indicator lights will not show all the time.
    10. When heating light turns off, the heating tank is at temperature. Make sure to drain the hot tank through the tap after the first heating cycle and dispose of water.

    Original price was: $350.00.Current price is: $270.00. ex. GST

    23% Off

    Add to cart
  • The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 2.5L/hour cold water chilling capacity
    • Cold water chills to approx. 5°C
    • Includes 10L refillable, filtered water bottle
    • Stylish front façade made from high-quality materials
    • Self-closing taps, operate with just one hand
    • Easy-to-clean with removable drip tray
    • 12-month standard warranty / 36-month refrigeration circuit warranty

    WATER RESERVOIRCold: 2.5L
    HOUSING MATERIALHigh-quality durable plastic with steel side panels
    REFRIGERATIONUsed R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 2.5L/h
    POWER CONSUMPTIONCooling: 85 W
    ELETRICAL220-240V, 50/60 Hz
    WEIGHT (PACKED)15kg
    DIMENSIONS (PACKED)1035 x 360 x 290 mm (HxWxD)
    WARRANTY12-month comprehensive coverage, additional 24-month compressor replacement.

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to direct sunlight or other sources of heat.
    3. It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10 cm of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of your water cooler.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Make sure the water dispenser is not plugged into an electrical outlet.
    3. Insert the water bottle vertically on the seat into the non-spill system of the water dispenser.
    4. Press the cold water tap down until water begins to flow.
    5. Insert the power plug into an electrical outlet.
    6. Turn the electric switches to ON position to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME.
    7. Cooling indicator lights should light up. The appliance is designed to supply cook or cold water whenever you need it. It will automatically turn on and off when the water reaches the desired temperatures

    Enquire Now

  • The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • Stylish front facade made from high quality durable plastic, coupled with steel side panels for strength
    • Easy-to-use taps, only one hand required
    • Food-grade, stainless steel water contact tubes
    • Durable polypropylene, self-closing taps
    • Easy-to-clean, removable drip tray
    • 12-month standard warranty and additional 24-month refrigeration system coverage
    • Full range of replacement parts

    Odyssey Countertop Units

    Original price was: $315.00.Current price is: $230.00. ex. GST

    27% Off

    Add to cart
  • The SU650 is a strong and robust fountain perfect for schools and outdoor areas. Australian-made and fully WaterMark approved, the range can house an additional bottle filler with an integrated catchment tray for on-the-go refills. The range is available in two standard colours or you have the option to retain the body’s industrial galvanised finish.

    • External bottle filler and catchment tray
    • Vandal resistant 316 stainless steel security screws
    • Stainless steel basin
    • Available in hot dipped galvanised or powder coating (2 colours)

    • Total height: 1000mm
    • Width: 275
    • 5mm steel

    AC-SU650-GREY

    Enquire Now

    20% Off

  • The Apollo 280 (A280) drinking fountain features a robust design with both bubbler and bottle refill outlets.

    • Australian made
    • 316 Stainless steel front panel, bubbler, basin and catchment tray (optional)
    • Strong 8mm mild steel construction
    • Easy water activation system
    • Unique designed sand/debris resistant activator button
    • Bottle refill outlet as standard
    • Disabled accessible (complies with AS1428 with longer basin and reduced height options)
    • Vandal resistant
    • Easy installation fixings and access for maintenance
    • Powder coated in premium Dulux steel shield coating finish
    • Full parts and technical back up service

    • Tap and dog bowl
    • Tap or maintenance tap available
    • Catchment tray
    • Longer basin for AS1428 compliance
    • Complete Stainless Steel model available
    • Water filter
    • Logo, motif or plaque
    • Side protection panels
    • All Stainless Steel model available
    • Compact size
    • Full stainless steel finish

    Apollo 280

    Enquire Now

    22% Off

  • Greater consciousness of plastic’s environmental impacts means the BF200 water bottle refill fountain is ideal for today.

    • Australian Made
    • 316 Stainless Steel Panel fixings and Catchment tray (optional)
    • Strong 8mm mild steel construction
    • Easy water activation system
    • Bottle Refill as standard
    • Available in 2 additional Models, BF200WSH(Short), BF200WC (with Catchment tray)
    • Vandal resistant
    • Easy installation and easy access for maintenance
    • Powder coated in Premium Dulux Steel shield Coating finish
    • Full parts and technical back up servic

    • Catchment tray
    • Water filter
    • Logo, motif or plaque
    • All stainless steel model available
    • Compact size
    • Full stainless steel finish

    • Total Height: 1050mm
    • Width: 180mm x 250 mm
    • 8mm steel one piece heavy duty construction

    BF200W

    Enquire Now

  • Greater consciousness of plastic’s environmental impacts means the BF200 water bottle refill fountain is ideal for today.

    • Australian Made
    • 316 Stainless Steel Panel fixings and Catchment tray (optional)
    • Strong 8mm mild steel construction
    • Easy water activation system
    • Bottle Refill as standard
    • Vandal resistant
    • Easy installation fixings and easy access for maintenance
    • Customisable with many options
    • Powder coated in Premium Dulux Steel shield Coating finish
    • Full parts and technical back up service

    • Tap and dog bowl
    • Water bubbler
    • Tap or maintenance tap available
    • Catchment tray
    • Water filter
    • Logo, motif or plaque

    BF200

    Enquire Now

  • The PF400 and PF450 are strong, robust fountains perfect for dog off-leash areas.

    • Australian made
    • Strong mild steel construction
    • 316 stainless steel tippable dog bowl
    • Fully welded tap mount socket
    • Bottle refill as option
    • Vandal resistant
    • Easy installation and easy access for maintenance
    • Powder coated in premium Dulux steel shield coating finish
    • Full parts and technical back up service

    PF450 PF400

    Enquire Now

Maintain a Healthy Lifestyle

Keep your water purified