shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    Packed Weight: 62kg

    • 70kg daily production rate
    • 20kg storage bin capacity
    • W 29mm x D 22mm x H 28mm, 15g ice cubes
    • Air cooled version
    • Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
    • R404a refrigerant gas
    • XSafe - Natural Sanitation System
    • Vertical evaporator spray-system technology
    • Front in and out air flow designed for placement in tight spaces
    • Ergonomic access to ice with sliding disappearing door
    • One touch cleaning for time and labour saving
    • Built-in storage bin
    • One touch button for easy cleaning
    • Easy access front condenser air filter for easy clean
    • Resistant stainless steel exterior
    • External indicator lights to show operation status and maintenance alert
    • Includes removable air filter, ice scoop, water and drain hose
    • Optional extras: SC8700000200 - Optional leg kit (NU 100/ NU 150/ NU 220 models)

    Original price was: $4,872.00.Current price is: $3,546.00. ex. GST

    27% Off

    Add to cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    Packed Weight: 56kg

    • 51kg daily production rate
    • 23kg storage bin capacity
    • 30mm dia x H 34mm, 20g ice cubes
    • Air cooled version
    • Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
    • EcoX hydrocarbons R290 refrigerant gas
    • XSafe - Natural Sanitation System
    • PWD-Progressive water discharge pumps excess water up to 15 meters
    • Horizontal Ice evaporator spray-system technology
    • Simple, reliable electromechanic controls
    • Built-in storage bin
    • Resistant stainless steel exterior
    • Easy access front ON-OFF switch
    • Routine maintenance visible alarm light on front panel
    • Ergonomically designed ice storage access with disappearing door and door closing movement dampening system
    • Front access condenser air filter, removable and washable
    • Includes removable air filter, ice scoop, water and drain hose
    • Optional Extra:
    • LVR073 - Adjustable Feet to 850mm

    Original price was: $4,914.00.Current price is: $3,577.00. ex. GST

    27% Off

    Add to cart
  • FT-186MA-A SS3FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity401L
    Temperature ControlMicroprocessor adjustable from -23°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1800mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width1440mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net93kg
    Packed Weight98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.7A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption357W, Heater 397W, Defrost 330W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,428.00.Current price is: $3,586.00. ex. GST

    34% Off

    Add to cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KM-80C HC SC

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit.

    Production Capacity per 24hoursApprox. 75kg @ 10°C Air temp; 10°C Water Approx. 68kg @ 21°C Air temp; 15°C Water Approx. 55kg @ 32°C Air temp; 21°C Water
    Max Storage CapacityApprox. 34kg
    Freeze Cycle TimeApprox. 23min
    Ice Production Per cycle
    Approx. 1.15kg / 130pcs
    Width605-mm
    Depth712mm
    Height988mm
    Weight Net50kg
    Packed Weight63kg
    CoolingAir
    AC Supply Voltage1 PHASE 220-240V 50Hz/ 10 AMP Plug
    AmperageRunning: 2.1A Starting: 12.5A
    Refrigerant ChargeR290/147g
    Operating Conditions
    Ambient Temp.: 7-38°C Water Supply Temp.: 7-32°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts:87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    Original price was: $5,478.48.Current price is: $3,620.00. ex. GST

    34% Off

    Add to cart
  • SwirlFlo® architectural drinking fountains combine elegant design with practical functionality. The contoured oval basin reduces splashing, providing a cleaner and safer drinking experience, while the sleek stainless steel construction enhances any architectural environment.

    • Patented stainless steel design complements both classic and contemporary architecture
    • Mechanical push-button bubbler continues to operate during power outages
    • Vandal-resistant bubblers with chrome-plated integral hood guards protect against contamination, airborne particles, and tampering
    • Durable stainless steel finish resists corrosion and maintains a polished appearance
    • One-piece back panel eliminates seams for a clean, streamlined look
    • Suitable for both indoor and outdoor installations

    MaterialStainless Steel
    Number of Stations1
    PowerNo Electrical Required
    DimensionsL:?14" W:?18-3/8" H:?11-5/16"
    Bubbler StyleVandal Resistant
    Mounting OptionWall Mount (On Wall)
    Chilling CapacityNon-refrigerated
    Installation LocationIndoor
    Shipping DimensionsL:?28-5/8" W:?20-5/8" H:?14-1/2"
    Shipping Weight18?LBS
    Included with ProductFountain
    FamilySwirlFlo
    ADAYes
    FilteredNo
    Code Compliance Drinking SolutionsADA & ICC A117.1 ASME A112.19.3/CSA B45.4 NSF 372 (lead free) NSF 61
    Code compliance InternationalNSF REG4

    $3,665.10 ex. GST

    Add to cart
  • The Elkay EZH2O® Enhanced Bottle Filling Station delivers fast, hygienic water refills while supporting sustainability by reducing the use of disposable plastic bottles. This space-saving, consolidated cooler and bottle filler features a drop-down cooler wrapper for easy filter access, along with integrated systems to track usage and monitor filter status.

    • Touchless, sensor-activated bottle filler for hygienic, effortless use; push-bar-activated bubbler for the drinking fountain
    • Hermetically sealed refrigeration system provides consistently chilled water
    • Quick-access filter wrapper allows front or side filter changes in under a minute for convenience and efficiency
    • 1.1 GPM fill rate with laminar flow for clean, splash-free filling; integrated drain system eliminates standing water
    • LED visual filter monitor alerts when filter replacement is needed
    • FillSafe® technology automatically recognizes a new filter and resets the LED indicator to green
    • High-capacity 3,000-gallon filter certified to NSF 42 and 53 for reduction of lead, Class 1 particulates, chlorine, and improvements in taste and odor
    • Green Ticker® tracks the number of 20 oz. single-use bottles saved
    • Silver ion–treated plastic components resist stains, odors, mold, and mildew
    • Low-energy LED lighting encourages use, aids in filling dark bottles, and illuminates dimly lit areas
    • One-box packaging ships the cooler and bottle filler together for simplified installation

    MaterialStainless Steel
    Number of Stations1
    FeaturesAntimicrobial Filtered Green Ticker? Hands Free Laminar Flow Real Drain Visual Filter Monitor Quick Filter Change Automatic Filter Status Reset
    Power115V/60Hz
    DimensionsL:?18-3/8" W:?19" H:?39-7/16"
    Bubbler StyleFlexi-Guard ? Safety Bubbler
    Mounting OptionWall Mount (On Wall)
    Chilling Capacity8.0 GPH
    Installation LocationIndoor
    Shipping DimensionsL:?20-1/2" W:?19-11/16" H:?29"
    Shipping Weight85?LBS
    Included with ProductBottle Filler Water Cooler Filter
    Ships In Multiple BoxesNo
    FamilyEZ Family
    ADAYes
    FilteredYes
    Code Compliance Drinking SolutionsADA & ICC A117.1 ASME A112.19.3/CSA B45.4 CAN/CSA C22.2 No. 120 NSF 372 (lead free) NSF 42 NSF 53 NSF 61 UL 399 NSF 401 FCC & ISED
    NoteOne-Box Packaging.

    $3,683.15 ex. GST

    Add to cart
  • FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity265L
    Temperature ControlMicroprocessor controlled Adjustable from -25 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width830mm
    Inside Dimensions Depth527mm
    Inside Dimensions Height588mm
    Weight Net87kg
    Packed Weight97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.8A
    RefrigerantR404A/200g
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionMotor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,808.10.Current price is: $3,837.00. ex. GST

    34% Off

    Add to cart
  • The Elkay EZH2O® Bottle Filling Station offers fast, hygienic bottle refilling while supporting environmentally responsible use of water by reducing reliance on single-use plastic bottles. Its fully recessed, in-wall construction delivers a clean, modern finish, while hands-free sensor operation and a built-in 20-second auto shut-off help improve hygiene and conserve water.

    • Can be installed as a standalone unit or integrated with Elkay® SwirlFlo® or Soft Sides® architectural drinking fountains
    • Hands-free, sensor-controlled activation for simple, hygienic operation
    • High-speed fill performance with a flow rate of 1.5 GPM
    • LED filter status display to clearly indicate when filter replacement is required
    • High-capacity 3,000-gallon filter certified to NSF 42 and NSF 53 for reduction of lead, chlorine, particulates, and improvements in taste and odour
    • Built-in Green Ticker® display shows the estimated number of 20 oz. plastic bottles diverted from landfill
    • Silver ion–treated plastic components help resist stains, odours, mould, and mildew
    • Hygienic drain system designed to prevent standing water buildup
    • Durable, touchless design for easy, reliable everyday use

    MaterialStainless Steel
    Number of Stations1
    FeaturesAntimicrobial Filtered Green Ticker? Hands Free Laminar Flow Real Drain Visual Filter Monitor
    Power115V/60Hz
    DimensionsL:?19-3/4" W:?3-1/2" H:?40-13/16"
    Bubbler StyleNo Bubbler
    Mounting OptionWall Mount (Inwall Frame/Plate)
    Chilling CapacityNon-refrigerated
    Installation LocationIndoor
    Shipping DimensionsL:?25-3/4" W:?42-7/16" H:?44-1/2"
    Shipping Weight36?LBS
    Included with ProductBottle Filler (LZWSMDC) Mounting Frame (MFWS100) Filter (EWF3000)
    Ships In Multiple BoxesYes
    FamilyEZ Family
    ADAYes
    FilteredYes
    Code Compliance Drinking SolutionsADA & ICC A117.1 CAN/CSA C22.2 No. 120 GreenSpec NSF 372 (lead free) NSF 42 NSF 53 NSF 61 UL 399 NSF 401
    NoteRefrigerated options available.

    $3,860.80 ex. GST

    Add to cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-65NE-25 SC

    New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hoursApprox.45kg @10°C Air temp; 10°C Water

    Approx. 44kg @21°C Air temp; 15°C Water

    Approx. 37kg @32°C Air temp; 21°C Water

    Max Storage Capacity
    Approx. 26kg ( Bin Control Settings Approx.18 Kg)
    Freeze Cycle TimeApprox. 22 Min
    Ice Production Per cycleApprox. 0.72kg/56pcs
    Width633mm
    Depth506mm
    Height930mm (Includes 90mm-125mm Legs)
    Weight Net53kg
    Packed Weight61kg
    CoolingAir
    AC Supply Voltage1 PHASE 220-240V 50Hz/ 10 AMP Plug
    AmperageRunning: 2.9A Rated: 2.9A Starting: 17A
    Refrigerant ChargeR134a / 200g
    Operating ConditionsAmbient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts:87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    Original price was: $5,899.82.Current price is: $3,898.00. ex. GST

    34% Off

    Add to cart
  • RT-186MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity318L
    Temperature ControlMicroprocessor controlled Adjustable from -6 to -12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1500mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width1140mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net81kg
    Packed Weight86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.0A
    RefrigerantR134a
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption245W, Heater 189W, Defrost 165W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,996.59.Current price is: $3,962.00. ex. GST

    34% Off

    Add to cart
  • Provide guests and staff with clean, great-tasting filtered water through a modern, in-wall dispensing system designed for professional environments. This touch-free unit is ideal for offices, hotels, and shared spaces, helping eliminate the need for bulky bottled water deliveries while saving storage space and reducing plastic waste.

    • Designed for installation in high-use areas such as conference rooms, lobbies, waiting areas, and staff break rooms
    • Slim, in-wall form factor fits easily between standard wall studs near existing water and electrical connections
    • Integrated drip tray with optional drain hookup for tidy and convenient use
    • NSF-certified filtration system reduces lead and other common contaminants (filter housing and remote filter cable supplied; installation optional)
    • Multi-colour LED indicator lights clearly display when filter replacement is required
    • Illuminated Green Ticker® display tracks the number of single-use plastic bottles avoided
    • Self-service, user-friendly dispensing for convenient and sustainable hydration
    • Touchless activation with an automatic shut-off timer to minimise spills and water waste
    • Premium glass front with brushed stainless steel finish and interactive lighting that brightens during use
    • Compatible with optional chiller systems (sold separately) for chilled or ambient water applications
    • Optional lockout feature helps prevent unauthorised or unsupervised use

    Number of Stations1
    TypeWater Dispensers
    FeaturesAmbient Water Automatic Filter Status Reset Filtered Green Ticker? Hands Free Laminar Flow Visual Filter Monitor
    Power115V/60Hz
    DimensionsL:?5-1/8" W:?18" H:?28"
    Mounting OptionWall Mount (Inwall Frame/Plate)
    Chilling CapacityNon-refrigerated
    Installation LocationIndoor
    Application TypeHospitality
    Shipping DimensionsL:?29" W:?19" H:?9"
    Shipping Weight41?LBS
    Included with ProductWater Dispenser SS Filter Box Remote Filter Cable 3000 Gal Filter
    FamilyezH2O Liv Pro
    ADAYes
    FilteredYes
    Code Compliance Drinking SolutionsADA & ICC A117.1 CAN/CSA C22.2 No. 120 NSF 372 (lead free) NSF 42 NSF 53 NSF 61 UL 399 NSF 401
    NoteIf the water dispenser is installed with a remote chiller, the filter should also be installed remotely near the chiller.

    $4,037.50 ex. GST

    Add to cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    Packed Weight: 63kg

    • Head only Ice maker
    • 175kg daily production rate
    • W 22mm x 22mm dia x H 22mm, 10g Ice cube
    • Air cooled version
    • Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
    • EcoX hydrocarbons R290 refrigerant gas
    • XSafe - Natural Sanitation System
    • Vertical evaporator spray-system technology
    • Front evaporator access for easy servicing
    • One touch button for easy cleaning
    • T304 grade stainless steel exterior
    • Auto-alert indicator lights to show operation status and maintenance
    • Requires storage bin model NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with NB 393)
    • Includes removable air filter, water & drain hose

    Original price was: $5,695.00.Current price is: $4,145.00. ex. GST

    27% Off

    Add to cart

Maintain a Healthy Lifestyle

Keep your water purified