shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • water coolers

    Hoshizaki HR-78MA-A SS1FZsplit 569L

    HR-78MA-A SS1FZsplit

    • Stainless steel interior and exterior.
    • Split doors on Upright series.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Standard with 4 x shelves.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 569L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 700mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 596mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 104kg
    Packed Weight 126kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.1A Starting:8.5A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 469W, Heater 426W, Defrost 426W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,405.00 exc gst & delivery

    Add to Cart
  • water coolers

    Hoshizaki RT-186MA-A-ML SS3FP 401L

    RT-186MA-A-ML SS3FP

    $3,512.00 exc gst & delivery

    Add to Cart
  • water coolers

    Hoshizaki FTE-120SDA-GN-ML SS2FZP 265L

    FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor controlled Adjustable from -25 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,520.00 exc gst & delivery

    Add to Cart
  • water coolers

    Hoshizaki RTE-120SDA-GN-ML SS2FP 265L

    RTE-120SDA-GN-ML SS2FP

    This Pillar Less range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Standard with 4 shelves / 2 doors. Programmable electronic controller and display. 2 years parts and labour warranty. Comes standard with 4 x lockable (115 mm) castors (not legs).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless Steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor controlled Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 83kg
    Packed Weight 93kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 1.4A
    Refrigerant R134a
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 195W, Heater 192W, Refrigeration 222W Defrost 199W*
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,520.00 exc gst & delivery

    Add to Cart
  • water coolers

    Hoshizaki HNC-150BE-R-BLH Sushi 57L

    HNC-150BE-R-BLH

    Airflow: The refrigeration-driven airflow from the evaporator is gentle and diffused, avoiding forced air circulation to prevent dehydration and weight loss, preserving the quality of displayed perishables.

    Temperature Control: Flipping the tray upside down offers a simple solution for quick temperature control, reducing contact with the cold tray and enhancing exposure to the internal air, while an in-cabinet thermometer ensures constant temperature monitoring.

    Attractive Display: The tubular-shaped evaporator consistently absorbs heat, freezing condensation externally to maintain an appealing frost layer without drips, complemented by adjustable LED lighting for versatile illumination.

    Convenience: A practical anti-slip top provides a suitable surface for serving dishes, and the condensing unit’s placement on either side directs air outflow away from the operator.

    Easy Cleaning: The sliding door’s height of 150 mm and the lightweight ABS trays with wave-shaped profiles enable effortless disassembly and removal for daily cleaning.

    Interior Clear Glass, ABS Plastic, Stainless Steel
    Exterior Clear Glass, ABS Plastic, PVC Plastic
    Effective Capacity 57L
    Saturation Temperature Approx 5 °C (Ambient temp 30°C, no load)
    Power Cord 2.4m
    Outside Dimensions Width 1500mm
    Outside Dimensions Depth 345mm
    Outside Dimensions Height 270mm
    Inside Dimensions Width 1145mm
    Inside Dimensions Depth 288mm
    Inside Dimensions Height 157mm
    Weight Net 37kg
    Packed Weight 52kg
    Cooling
    Air
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 1.0A Starting: 6A
    Refrigerant R600a / 35g
    Operating Conditions Ambient Temp.: 10 – 30°C Voltage Range: Rated Voltage ±6%

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,593.00 exc gst & delivery

    Add to Cart
  • Sale!
    SU600 1 1

    Outdoor Drinking fountain – Freestanding Bubbler only

    The SU600 is a strong and robust fountain perfect for schools and outdoor areas. Australian-made and fully WaterMark approved, the range can house an additional bottle filler with an integrated catchment tray for on-the-go refills. The range is available in two standard colours or you have the option to retain the body’s industrial galvanised finish.

    • Vandal resistant 316 stainless steel security screws
    • Stainless steel basin
    • Available in hot dipped galvanised or powder coating (2 colours)

    • Total height: 1000mm
    • Width: 275
    • 5mm steel

    SU600 SU600-GREY

    Data Sheet

    Original price was: $4,500.00.Current price is: $3,611.00. exc gst & delivery

    20% Saving

    Add to Cart
  • Sale!
    SU650

    Outdoor Drinking fountain – Freestanding Bubbler and Bottle Filler

    The SU650 is a strong and robust fountain perfect for schools and outdoor areas. Australian-made and fully WaterMark approved, the range can house an additional bottle filler with an integrated catchment tray for on-the-go refills. The range is available in two standard colours or you have the option to retain the body’s industrial galvanised finish.

    • External bottle filler and catchment tray
    • Vandal resistant 316 stainless steel security screws
    • Stainless steel basin
    • Available in hot dipped galvanised or powder coating (2 colours)

    • Total height: 1000mm
    • Width: 275
    • 5mm steel

    AC-SU650-GREY

    Data Sheet

    Original price was: $4,500.00.Current price is: $3,611.00. exc gst & delivery

    20% Saving

    Add to Cart
  • water coolers

    Hoshizaki KM-80C HC SC Cresent 68kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    KM-80C HC SC

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit.

    Production Capacity per 24hours Approx. 75kg @ 10°C Air temp; 10°C Water Approx. 68kg @ 21°C Air temp; 15°C Water Approx. 55kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx. 34kg
    Freeze Cycle Time Approx. 23min
    Ice Production Per cycle
    Approx. 1.15kg / 130pcs
    Width 605-mm
    Depth 712mm
    Height 988mm
    Weight Net 50kg
    Packed Weight 63kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 2.1A Starting: 12.5A
    Refrigerant Charge R290/147g
    Operating Conditions
    Ambient Temp.: 7-38°C Water Supply Temp.: 7-32°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,612.00 exc gst & delivery

    Add to Cart
  • water coolers

    Hoshizaki RT-186MA-A SS2F 401L

    RT-186MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 318L
    Temperature Control Microprocessor controlled Adjustable from -6 to -12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1500mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 1140mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 81kg
    Packed Weight 86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.0A
    Refrigerant R134a
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 245W, Heater 189W, Defrost 165W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,614.00 exc gst & delivery

    Add to Cart
  • Sale!
    NW 307 AS OX AU

    Scotsman NW 307 AS OX – 175kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    Packed Weight: 63kg

    • Head only Ice maker
    • 175kg daily production rate
    • W 22mm x 22mm dia x H 22mm, 10g Ice cube
    • Air cooled version
    • Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
    • EcoX hydrocarbons R290 refrigerant gas
    • XSafe - Natural Sanitation System
    • Vertical evaporator spray-system technology
    • Front evaporator access for easy servicing
    • One touch button for easy cleaning
    • T304 grade stainless steel exterior
    • Auto-alert indicator lights to show operation status and maintenance
    • Requires storage bin model NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with NB 393)
    • Includes removable air filter, water & drain hose

    Specification Sheet Sales Brochure Installation Operation Manual

    Original price was: $5,094.00.Current price is: $3,741.00. exc gst & delivery

    27% Saving

    Add to Cart
  • Sale!
    NW 307 AS OX AU 1

    Scotsman NWH 307 AS OX – 164kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    Packed Weight: 63kg

    • Head only Ice maker
    • 164kg daily production rate
    • W 10mm x D 22mm x H 28mm, 6g ice cubes
    • Air cooled version
    • Agion Technology resists microbe's growth and odours development to produce pure, clear and transparent ice cubes
    • EcoX hydrocarbons R290 refrigerant gas
    • XSafe - Natural Sanitation System
    • Vertical evaporator spray-system technology
    • Top air discharge - suitable for narrown space installation
    • Front evaporator access for easy servicing
    • One touch button for easy cleaning
    • T304 grade stainless steel exterior
    • Auto-alert indicator lights to show operation status and maintenance
    • Requires storage bin model NB 193, NB 393 with CBT 30 52 AMCD cover (required cover when used with NB 393)
    • Includes removable air filter, water & drain hose

    Specification Sheet Sales Brochure Installation Operation Manual

    Original price was: $5,094.00.Current price is: $3,741.00. exc gst & delivery

    27% Saving

    Add to Cart
  • water coolers

    Hoshizaki IM-65NE-25 SC Cube 44kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-65NE-25 SC

    New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx.45kg @10°C Air temp; 10°C Water

    Approx. 44kg @21°C Air temp; 15°C Water

    Approx. 37kg @32°C Air temp; 21°C Water
    Max Storage Capacity
    Approx. 26kg ( Bin Control Settings Approx.18 Kg)
    Freeze Cycle Time Approx. 22 Min
    Ice Production Per cycle Approx. 0.72kg/56pcs
    Width 633mm
    Depth 506mm
    Height 930mm (Includes 90mm-125mm Legs)
    Weight Net 53kg
    Packed Weight 61kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 2.9A Rated: 2.9A Starting: 17A
    Refrigerant Charge R134a / 200g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $3,779.00 exc gst & delivery

    Add to Cart

Maintain a Healthy Lifestyle

Keep your water purified