shop with the ultimate water solutions store!
Peruse our beautiful range of classy products.
Filter your Search
- Sale!
- Efficient Cooling: The hygienic rust-free tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
- Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
- User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
- Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
Cold Water Supply 20L/H (8-12°C) | Cold Water Temp 8-12°C Cooling Power 200W Filter Activated Carbon, PP Sediment Refrigerant R290 60g Measurements 99cm H x 30cm W x 30cm D Bubbler Height 7cm Tap Height 25cm Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$1,450.00Original price was: $1,450.00.$1,200.00Current price is: $1,200.00. exc gst & delivery17% Saving
- Sale!
Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.
- Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
- Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
- Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
Cold Water Supply 20L/H(8-12°C) Cold Water Temp 8-12°C Material Stainless Steel SUS304 Power Supply 220-240V / 50-60Hz Refrigerant R290 60g Bubbler Height 7cm Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$1,450.00Original price was: $1,450.00.$1,200.00Current price is: $1,200.00. exc gst & delivery17% Saving
- Sale!
Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Filtered Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.
- Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
- Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
- Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
- User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
- Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
Cold Water Supply 20L/H (8-12°C) Cold Water Temp 8-12°C Cooling Power 200W Filter Activated Carbon, PP Sediment Material Stainless Steel SUS304 Measurements 99cm H x 30cm W x 30cm D Bubbler Height 7cm Tap Height 25cm Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$1,450.00Original price was: $1,450.00.$1,200.00Current price is: $1,200.00. exc gst & delivery17% Saving
- Sale!
Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.
- Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
- Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
- Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
- Hot Water Safety Lock: Provides safety assurance for users.
Cold Water Supply 2-3L/H (≤10℃) Connection Heating Power
Direct Connect 550W Cooling Power 90W Filter Activated Carbon, PP Sediment Hot Water Supply 5L/H(≥90℃) Voltage 220V - 50Hz Weight 16kg Working Ambient 10 – 32℃ Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$550.00Original price was: $550.00.$480.00Current price is: $480.00. exc gst & delivery13% Saving
- Sale!
B-301
- Seamless polyethylene bin liner for sanitary storage.
- Sealed door gasket reduces risk of airborne bacteria.
- Easy cleaning and long lasting attractive appearance.
- View windows provide instant inspection and thermal break.
- Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.
Width 559mm Depth 820mm Height 1168mm (Dimensions include 152mm legs) Weight Net 37kg Packed Weight 49kg $1,925.28Original price was: $1,925.28.$1,272.00Current price is: $1,272.00. exc gst & delivery34% Saving
- Sale!
B-501
- Seamless polyethylene bin liner for sanitary storage.
- Sealed door gasket reduces risk of airborne bacteria.
- Easy cleaning and long lasting attractive appearance.
- View windows provide instant inspection and thermal break.
- Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.
Width 781mm Depth 820mm Height 1168mm (Dimensions include 152mm legs) Weight Net 47kg Packed Weight 57kg $2,441.38Original price was: $2,441.38.$1,613.00Current price is: $1,613.00. exc gst & delivery34% Saving
- Sale!
B-801
- Seamless polyethylene bin liner for sanitary storage.
- Sealed door gasket reduces risk of airborne bacteria.
- Easy cleaning and long lasting attractive appearance.
- View windows provide instant inspection and thermal break.
- Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.
Width 1238mm Depth 820mm Height 1168mm (Dimensions include 152mm legs) Weight Net 64kg Packed Weight 86kg $3,220.56Original price was: $3,220.56.$2,128.00Current price is: $2,128.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
DB 200
- Produce more quality ice.
- Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
- Use less energy.
- Cycle 1/2 as many times as competition.
- Cubes do not clump together in storage bins.
- Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
- Long life stainless steel construction.
- Inbuilt, removable, easily cleaned, reusable air filters.
Push Button Single Auger Agitator Max Storage Capacity Approx. 91kg Width 762mm Depth 684mm Height 1346mm (Includes 152mm legs) Weight Net 85kg Packed Weight 130kg AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug Capacity Volume 5.72 ft³ Amperage Rated: 1.4A Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately) Dispensing Rate 5.89 kg Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V $14,952.00Original price was: $14,952.00.$9,879.00Current price is: $9,879.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
DB 200 H20
- Produce more quality ice.
- Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
- Use less energy.
- Cycle 1/2 as many times as competition.
- Cubes do not clump together in storage bins.
- Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
- Long life stainless steel construction.
- Inbuilt, removable, easily cleaned, reusable air filters.
Push Button 2 Push Buttons – 1 x Ice & 1 x Water – Single Auger Agitator Max Storage Capacity Approx. 91kg Width 762mm Depth 684mm Height 1346mm (Includes 152mm legs) Weight Net 85kg Packed Weight 130kg AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug Capacity Volume 5.72 ft³ Amperage Rated: 1.4A Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately) Dispensing Rate 5.89 kg Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V $15,792.00Original price was: $15,792.00.$10,434.00Current price is: $10,434.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
DCM 120
- Premium Cubelet ice
- Smooth ice dispense
- No ice bridging
- Robust and reliable
- Sanitary self-service application
- Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
- Dispenses ice only. water only or ice and water
- Adjustable portion controlled dispensing
- Due to Auger system water consumption is equal to ice production.
- 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil
Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water Max Storage Capacity Approx. 4kg Width 350mm Depth 585mm Height 815mm (Includes 152mm legs) Weight Net 57kg Packed Weight 66kg AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6% Additional Parts: HLF10 water filter $10,104.19Original price was: $10,104.19.$6,676.00Current price is: $6,676.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
DCM 60
- Premium Cubelet ice
- Smooth ice dispense
- No ice bridging
- Robust and reliable
- Sanitary self-service application
- Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
- Dispenses ice only. water only or ice and water
- Adjustable portion controlled dispensing
- Due to Auger system water consumption is equal to ice production.
- 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil
Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water Max Storage Capacity Approx. 4kg Width 350mm Depth 585mm Height 815mm (Includes 152mm legs) Weight Net 57kg Packed Weight 66kg AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6% Additional Parts: HLF10 water filter $9,385.49Original price was: $9,385.49.$6,201.00Current price is: $6,201.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
FM-150 KE
- Premium Cubelet ice
- Smooth ice dispense
- No ice bridging
- Robust and reliable
- Sanitary self-service application
- Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
- Dispenses ice only. water only or ice and water
- Adjustable portion controlled dispensing
- Due to Auger system water consumption is equal to ice production.
- 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil
Production Capacity per 24hours Approx. 150kg @10°C Air temp; 10°C Water Approx. 130kg @ 21°C Air temp; 15°C Water Approx. 110kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 26kg -Leveled Width 640mm Depth 600mm Height 803mm (Includes 70mm-110mm Legs) Weight Net 71kg Packed Weight 82kg Cooling AC Supply Voltage
Air 1 PHASE 220-240V 50Hz/ 10 AMP Plug
Amperage Refrigerant Charge
Running: 5.0A Starting: 20A R134a / 200g
Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10% Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg $8,422.85Original price was: $8,422.85.$5,565.00Current price is: $5,565.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
FM-150 KE-N
- “Freeze Burn” is no longer an issue when displaying fresh fish or produce.
- Carbon auger bearings have a longer life expectancy than roller bearing, reducing maintenance costs.
- One piece bin moulding – rounded corners for hygiene and ease of cleaning.
- Automatic flush function, helps keep the ice making system clean.
- Integrated door handle for ease use and hygiene.
- Controller board with Operational Status display assists in troubleshooting.
- Due to the auger system, water consumption is equal to ice production.
- 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil.
Production Capacity per 24hours Approx. 140kg @10°C Air temp; 10°C Water Approx. 120kg @ 21°C Air temp; 15°C Water Approx. 100kg @ 32°C Air temp; 21°C Water Max Storage Capacity Approx. 32kg Width 640mm Depth 600mm Height 803mm (Includes 70mm-110mm Legs) Weight Net 71kg Packed Weight 82kg Cooling AC Supply Voltage
Air 1 PHASE 220-240V 50Hz/ 10 AMP Plug
Amperage Refrigerant Charge
Running: 5.0A Starting: 20A R134a / 200g
Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10% Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg $8,919.79Original price was: $8,919.79.$5,893.00Current price is: $5,893.00. exc gst & delivery34% Saving
- Sale!
FT-126MA-A SS2FZ
- Complete with stainless steel top.
- Standard with 4 shelves / 2 doors.
- Programmable electronic controller and display.
- 2 years parts and labour warranty.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic (Doors) Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door) Max Storage Capacity 231L Temperature Control Microprocessor controlled Adjustable from -23 to -7°C Evaporator Fin & Tube type Outside Dimensions Width 1200mm Outside Dimensions Depth 600mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 840mm Inside Dimensions Depth 436mm Inside Dimensions Height 599mm Weight Net 72kg Packed Weight 77kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 2.6A Refrigerant R404A/160g Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6% Electrical Consumption 342W, Heater 371W, Defrost 330W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$4,692.00Original price was: $4,692.00.$3,100.00Current price is: $3,100.00. exc gst & delivery34% Saving
- Sale!
FT-186MA-A SS3FZ
- Complete with stainless steel top.
- Standard with 4 shelves / 2 doors.
- Programmable electronic controller and display.
- 2 years parts and labour warranty.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic (Doors) Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door) Max Storage Capacity 401L Temperature Control Microprocessor adjustable from -23°C to -7°C Evaporator Fin & Tube type Outside Dimensions Width 1800mm Outside Dimensions Depth 600mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 1440mm Inside Dimensions Depth 436mm Inside Dimensions Height 599mm Weight Net 93kg Packed Weight 98kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 2.7A Refrigerant R404A Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6% Electrical Consumption 357W, Heater 397W, Defrost 330W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,428.00Original price was: $5,428.00.$3,586.00Current price is: $3,586.00. exc gst & delivery34% Saving
- Sale!
FTC-90DEA-GN-3D SS3DFZ
- Stainless steel interior and exterior.
- Programmable Digital controller and display.
- 3 x Auto closing drawers.
- Fits GN pans 100mm Deep.
- Compact slide out refrigeration unit for quick maintenance.
- 2 years parts and labour warranty.
- Comes standard with 115mm lockable castors (not legs)
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic (Doors) Exterior Stainless Steel, Galvanized Steel (Rear /Bottom) Max Storage Capacity 160L Temperature Control Microprocessor adjustable from -25°C to -7°C Evaporator Fin & Tube type Outside Dimensions Width 900mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm Inside Dimensions Width 530mm Inside Dimensions Depth 533mm Inside Dimensions Height 588mm Weight Net 86kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 PHASE 220-240V 50Hz/10 Amp Plug Amperage Rated: 3.0A Refrigerant R404A/200g Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Heater 362W, Defrost 362W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$7,670.00Original price was: $7,670.00.$5,068.00Current price is: $5,068.00. exc gst & delivery34% Saving
- Sale!
FTE-120SD-GN SS2FZ
- Complete with stainless steel top.
- Standard with 4 shelves / 2 doors.
- Programmable electronic controller and display.
- 2 years parts and labour warranty.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic Exterior Stainless steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 265L Temperature Control Microprocessor adjustable from -25°C to -7°C Evaporator Fin & Tube type Outside Dimensions Width 1200mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 830mm Inside Dimensions Depth 527mm Inside Dimensions Height 588mm Weight Net 87kg Packed Weight 97kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 2.8A Refrigerant R404A Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,270.83Original price was: $5,270.83.$3,483.00Current price is: $3,483.00. exc gst & delivery34% Saving
- Sale!
FTE-120SDA-GN-ML SS2FZP
- With no centre pillar you can use trays and containers of varying sizes.
- This Pillar Less range is perfect for kitchens looking to maximise their food storage.
- Complete with stainless steel top.
- Standard with 4 shelves / 2 doors.
- Programmable electronic controller and display.
- 2 years parts and labour warranty.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic Exterior Stainless steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 265L Temperature Control Microprocessor controlled Adjustable from -25 to -7°C Evaporator Fin & Tube type Outside Dimensions Width 1200mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 830mm Inside Dimensions Depth 527mm Inside Dimensions Height 588mm Weight Net 87kg Packed Weight 97kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 2.8A Refrigerant R404A/200g Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,808.10Original price was: $5,808.10.$3,837.00Current price is: $3,837.00. exc gst & delivery34% Saving
- Sale!
HF-128MA-A SS2UFZ
- Split doors and Upright series.
- Stainless steel interior and exterior.
- Programmable electronic controller and display.
- Standard with 8 x shelves.
- 2 years parts and labour warranty.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
Interior Stainless Steel, ABS Plastic (Doors) Exterior Stainless steel, Galvanized Steel (Top,Rear/Bottom) Max Storage Capacity 1047L Temperature Control Microprocessor Adjustable from -23 to -7°C Evaporator Fin & Tube type Outside Dimensions Width 1200mm Outside Dimensions Depth 800mm Outside Dimensions Height 2015mm Inside Dimensions Width 1096mm Inside Dimensions Depth 646mm Inside Dimensions Height 1484mm Weight Net 149kg Packed Weight 180kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 4.9A Starting: 15.6A Refrigerant R404A Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption 700W, Heater 474W, Defrost 474W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$7,308.00Original price was: $7,308.00.$4,829.00Current price is: $4,829.00. exc gst & delivery34% Saving
- Sale!
HNC-150BE-R-BLH
Airflow: The refrigeration-driven airflow from the evaporator is gentle and diffused, avoiding forced air circulation to prevent dehydration and weight loss, preserving the quality of displayed perishables.
Temperature Control: Flipping the tray upside down offers a simple solution for quick temperature control, reducing contact with the cold tray and enhancing exposure to the internal air, while an in-cabinet thermometer ensures constant temperature monitoring.
Attractive Display: The tubular-shaped evaporator consistently absorbs heat, freezing condensation externally to maintain an appealing frost layer without drips, complemented by adjustable LED lighting for versatile illumination.
Convenience: A practical anti-slip top provides a suitable surface for serving dishes, and the condensing unit’s placement on either side directs air outflow away from the operator.
Easy Cleaning: The sliding door’s height of 150 mm and the lightweight ABS trays with wave-shaped profiles enable effortless disassembly and removal for daily cleaning.
Interior Clear Glass, ABS Plastic, Stainless Steel Exterior Clear Glass, ABS Plastic, PVC Plastic Effective Capacity 57L Saturation Temperature Approx 5 °C (Ambient temp 30°C, no load) Power Cord 2.4m Outside Dimensions Width 1500mm Outside Dimensions Depth 345mm Outside Dimensions Height 270mm Inside Dimensions Width 1145mm Inside Dimensions Depth 288mm Inside Dimensions Height 157mm Weight Net 37kg Packed Weight 52kg Cooling Air AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 1.0A Starting: 6A Refrigerant R600a / 35g Operating Conditions Ambient Temp.: 10 – 30°C Voltage Range: Rated Voltage ±6% Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,342.40Original price was: $5,342.40.$3,530.00Current price is: $3,530.00. exc gst & delivery34% Saving
- Sale!
HR-78MA-A SS1FZsplit
- Stainless steel interior and exterior.
- Split doors on Upright series.
- Programmable electronic controller and display.
- 2 years parts and labour warranty.
- Standard with 4 x shelves.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic (Doors) Exterior Stainless steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 569L Temperature Control Microprocessor Adjustable from -23 to -7°C Evaporator Fin & Tube type Outside Dimensions Width 700mm Outside Dimensions Depth 800mm Outside Dimensions Height 2015mm Inside Dimensions Width 596mm Inside Dimensions Depth 646mm Inside Dimensions Height 1484mm Weight Net 104kg Packed Weight 126kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 4.1A Starting:8.5A Refrigerant R404A Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption 469W, Heater 426W, Defrost 426W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,292.00Original price was: $5,292.00.$3,497.00Current price is: $3,497.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
IM-100CNE-28 SC
- New intelligent control circuit dedicated to saving power and water consumption.
- Micro computer controller controls ice making process to work at peak performance in any conditions.
- Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.
- New 7 segment operational display panel for ease of use.
- Unique closed cell water circuit for ultimate contamination protection.
- Durable stainless steel exterior.
- Easily accessible and cleanable air filters reduce costly callouts.
- Exceptionally hard crystal clear cubes that melt slowly.
- Auto rinse and flush cycle.
- 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.
Production Capacity per 24hours Approx. 85kg @10°C Air temp; 10°C WaterApprox. 83kg @21°C Air temp; 15°C Water Approx. 73kg @32°C Air temp; 21°C Water
Max Storage Capacity Approx. 38kg Freeze Cycle Time Approx. 29 Min Ice Production Per cycle Approx. 1.8kg/80pcs Width 1004mm Depth 600mm Height 800mm (Includes 90mm-125mm Legs) Weight Net 77kg Packed Weight 88kg Cooling Air AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMp Plug Amperage Running: 4.1A Rated: 4.1A Starting: 19A Refrigerant Charge R134a / 290g Operating Conditions Ambient Temp.: 1-40°CWater Supply Temp.: 5-35°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6% Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg $8,316.00Original price was: $8,316.00.$5,495.00Current price is: $5,495.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
IM-130CNE-28 SC
- New intelligent control circuit dedicated to saving power and water consumption.
- Micro computer controller controls ice making process to work at peak performance in any conditions.
- Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.
- New 7 segment operational display panel for ease of use.
- Unique closed cell water circuit for ultimate contamination protection.
- Durable stainless steel exterior.
- Easily accessible and cleanable air filters reduce costly callouts.
- Exceptionally hard crystal clear cubes that melt slowly.
- Auto rinse and flush cycle.
- 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.
Production Capacity per 24hours Approx. 100kg @10°C Air temp; 10°C Water Approx. 104kg @21°C Air temp; 15°CWater
Approx. 88kg @32°C Air temp; 21°C Water
Max Storage Capacity Approx. 50kg (Bin Control Setting Approx.28kg) Freeze Cycle Time Approx. 22 Min Ice Production Per cycle Approx. 1.8kg/80pcs Width 704mm Depth 506mm Height 1270mm (Includes 70mm-110mm Legs) Weight Net 76kg Packed Weight 85kg Cooling Air AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug Amperage Running: 4.5A Rated: 4.5A Starting: 19A Refrigerant Charge R404A / 380g Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6% Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg $9,102.24Original price was: $9,102.24.$6,014.00Current price is: $6,014.00. exc gst & delivery34% Saving
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
IM-240ANE-28 B
New intelligent control circuit dedicated to saving power and water consumption.Micro computer controller controls ice making process to work at peak performance in any conditions.Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.New 7 segment operational display panel for ease of use.Unique closed cell water circuit for ultimate contamination protection.Durable stainless steel exterior.Easily accessible and cleanable air filters reduce costly callouts.Exceptionally hard crystal clear cubes that melt slowly.Auto rinse and flush cycle.3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.Achieved by stacking 2 units side by side
Production Capacity per 24hours Approx. 220kg @10°C Air temp; 10°C Water Approx. 205kg @21°C Air temp; 15°C Water
Approx. 160kg @32°C Air temp; 21°C Water
Max Storage Capacity 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin Freeze Cycle Time Approx. 20 Min Ice Production Per cycle Approx. 3.2kg/140pcs Width 560mm Depth 700mm Height 880mm Weight Net 80kg Packed Weight 95kg Cooling Air AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug Amperage Running: 6.6A Rated: 6.6A Starting: 35A Refrigerant Charge R404A / 480g Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6% Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg $9,176.83Original price was: $9,176.83.$6,063.00Current price is: $6,063.00. exc gst & delivery34% Saving
