shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  •  

    • Efficient Cooling: The hygienic rust-free tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

    Cold Water Supply
    20L/H (8-12°C)     |
    Cold Water Temp
    8-12°C
    Cooling Power
    200W
    Filter Activated Carbon, PP Sediment
    Refrigerant  R290 60g
    Measurements 99cm H x 30cm W x 30cm D
    Bubbler Height 7cm
    Tap Height
    25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.

    Cold Water Supply
    20L/H(8-12°C)
    Cold Water Temp
    8-12°C
    Material
    Stainless Steel SUS304
    Power Supply 220-240V / 50-60Hz
    Refrigerant  R290 60g
    Bubbler Height 7cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Filtered Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

     

    Cold Water Supply
    20L/H (8-12°C)
    Cold Water Temp
    8-12°C
    Cooling Power
    200W
    Filter Activated Carbon, PP Sediment
    Material Stainless Steel SUS304
    Measurements 99cm H x 30cm W x 30cm D
    Bubbler Height 7cm
    Tap Height
    25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.

    • Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
    • Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
    • Hot Water Safety Lock: Provides safety assurance for users.

    Cold Water Supply
    2-3L/H (≤10℃)
    Connection

    Heating Power

    Direct Connect
    550W
    Cooling Power
    90W
    Filter Activated Carbon, PP Sediment
    Hot Water Supply  5L/H(≥90℃)
    Voltage 220V - 50Hz
    Weight 16kg
    Working Ambient
    10 – 32℃

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $550.00.Current price is: $480.00. exc gst & delivery

    13% Saving

    Add to Cart
  • B-301

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 559mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 37kg
    Packed Weight 49kg

     

    $1,269.00 exc gst & delivery

    Add to Cart
  • B-501

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 781mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 47kg
    Packed Weight 57kg

     

    $1,609.00 exc gst & delivery

    Add to Cart
  • B-801

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 1238mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 64kg
    Packed Weight 86kg

     

    $2,123.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button Single Auger Agitator
    Max Storage Capacity Approx. 91kg
    Width 762mm
    Depth 684mm
    Height 1346mm (Includes 152mm legs)
    Weight Net 85kg
    Packed Weight 130kg
    AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume 5.72 ft³
    Amperage Rated: 1.4A
    Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate 5.89 kg
    Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V

     

    $9,729.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200 H20

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button 2 Push Buttons – 1 x Ice & 1 x Water – Single Auger Agitator
    Max Storage Capacity Approx. 91kg
    Width 762mm
    Depth 684mm
    Height 1346mm (Includes 152mm legs)
    Weight Net 85kg
    Packed Weight 130kg
    AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume 5.72 ft³
    Amperage Rated: 1.4A
    Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate 5.89 kg
    Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V

     

    $10,418.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 120

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage Capacity Approx. 4kg
    Width 350mm
    Depth 585mm
    Height 815mm (Includes 152mm legs)
    Weight Net 57kg
    Packed Weight 66kg
    AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts: HLF10 water filter

     

    $6,472.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 60

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage Capacity Approx. 4kg
    Width 350mm
    Depth 585mm
    Height 815mm (Includes 152mm legs)
    Weight Net 57kg
    Packed Weight 66kg
    AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts: HLF10 water filter

     

    $6,011.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    FM-150 KE

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 150kg @10°C Air temp; 10°C Water Approx. 130kg @ 21°C Air temp; 15°C Water Approx. 110kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx.  26kg -Leveled
    Width 640mm
    Depth 600mm
    Height 803mm (Includes 70mm-110mm Legs)
    Weight Net 71kg
    Packed Weight 82kg
    Cooling

    AC Supply Voltage

    Air

    1 PHASE 220-240V 50Hz/ 10 AMP Plug

    Amperage

    Refrigerant Charge

    Running: 5.0A Starting: 20A

    R134a / 200g

    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10%
    Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,395.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    FM-150 KE-N

    • “Freeze Burn” is no longer an issue when displaying fresh fish or produce.
    • Carbon auger bearings have a longer life expectancy than roller bearing, reducing maintenance costs.
    • One piece bin moulding – rounded corners for hygiene and ease of cleaning.
    • Automatic flush function, helps keep the ice making system clean.
    • Integrated door handle for ease use and hygiene.
    • Controller board with Operational Status display assists in troubleshooting.
    • Due to the auger system, water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil.

    Production Capacity per 24hours Approx. 140kg @10°C Air temp; 10°C Water Approx. 120kg @ 21°C Air temp; 15°C Water Approx. 100kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx.  32kg
    Width 640mm
    Depth 600mm
    Height 803mm (Includes 70mm-110mm Legs)
    Weight Net 71kg
    Packed Weight 82kg
    Cooling

    AC Supply Voltage

    Air

    1 PHASE 220-240V 50Hz/ 10 AMP Plug

    Amperage

    Refrigerant Charge

    Running: 5.0A Starting: 20A

    R134a / 200g

    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10%
    Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,713.00 exc gst & delivery

    Add to Cart
  • FT-126MA-A SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 231L
    Temperature Control Microprocessor controlled Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 840mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 72kg
    Packed Weight 77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.6A
    Refrigerant R404A/160g
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 342W, Heater 371W, Defrost 330W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $2,707.00 exc gst & delivery

    Add to Cart
  • FT-186MA-A SS3FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 401L
    Temperature Control Microprocessor adjustable from -23°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1800mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 1440mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 93kg
    Packed Weight 98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.7A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 357W, Heater 397W, Defrost 330W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $3,189.00 exc gst & delivery

    Add to Cart
  • FTC-90DEA-GN-3D SS3DFZ

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 3 x Auto closing drawers.
    • Fits GN pans 100mm Deep.
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs)
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity 160L
    Temperature Control Microprocessor adjustable from -25°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 900mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm
    Inside Dimensions Width 530mm
    Inside Dimensions Depth 533mm
    Inside Dimensions Height 588mm
    Weight Net 86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 PHASE 220-240V 50Hz/10 Amp Plug
    Amperage Rated: 3.0A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Heater 362W, Defrost 362W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $4,897.00 exc gst & delivery

    Add to Cart
  • FTE-120SD-GN SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor adjustable from -25°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $3,156.00 exc gst & delivery

    Add to Cart
  • FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor controlled Adjustable from -25 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $3,520.00 exc gst & delivery

    Add to Cart
  • HF-128MA-A SS2UFZ

    • Split doors and Upright series.
    • Stainless steel interior and exterior.
    • Programmable electronic controller and display.
    • Standard with 8 x shelves.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Top,Rear/Bottom)
    Max Storage Capacity 1047L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 1096mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 149kg
    Packed Weight 180kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.9A Starting: 15.6A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 700W, Heater 474W, Defrost 474W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $4,739.00 exc gst & delivery

    Add to Cart
  • HNC-150BE-R-BLH

    Airflow: The refrigeration-driven airflow from the evaporator is gentle and diffused, avoiding forced air circulation to prevent dehydration and weight loss, preserving the quality of displayed perishables.

    Temperature Control: Flipping the tray upside down offers a simple solution for quick temperature control, reducing contact with the cold tray and enhancing exposure to the internal air, while an in-cabinet thermometer ensures constant temperature monitoring.

    Attractive Display: The tubular-shaped evaporator consistently absorbs heat, freezing condensation externally to maintain an appealing frost layer without drips, complemented by adjustable LED lighting for versatile illumination.

    Convenience: A practical anti-slip top provides a suitable surface for serving dishes, and the condensing unit’s placement on either side directs air outflow away from the operator.

    Easy Cleaning: The sliding door’s height of 150 mm and the lightweight ABS trays with wave-shaped profiles enable effortless disassembly and removal for daily cleaning.

    Interior Clear Glass, ABS Plastic, Stainless Steel
    Exterior Clear Glass, ABS Plastic, PVC Plastic
    Effective Capacity 57L
    Saturation Temperature Approx 5 °C (Ambient temp 30°C, no load)
    Power Cord 2.4m
    Outside Dimensions Width 1500mm
    Outside Dimensions Depth 345mm
    Outside Dimensions Height 270mm
    Inside Dimensions Width 1145mm
    Inside Dimensions Depth 288mm
    Inside Dimensions Height 157mm
    Weight Net 37kg
    Packed Weight 52kg
    Cooling
    Air
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 1.0A Starting: 6A
    Refrigerant R600a / 35g
    Operating Conditions Ambient Temp.: 10 – 30°C Voltage Range: Rated Voltage ±6%

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $3,593.00 exc gst & delivery

    Add to Cart
  • HR-78MA-A SS1FZsplit

    • Stainless steel interior and exterior.
    • Split doors on Upright series.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Standard with 4 x shelves.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 569L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 700mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 596mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 104kg
    Packed Weight 126kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.1A Starting:8.5A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 469W, Heater 426W, Defrost 426W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $3,405.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-100CNE-28 SC

    • New intelligent control circuit dedicated to saving power and water consumption.
    • Micro computer controller controls ice making process to work at peak performance in any conditions.
    • Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.
    • New 7 segment operational display panel for ease of use.
    • Unique closed cell water circuit for ultimate contamination protection.
    • Durable stainless steel exterior.
    • Easily accessible and cleanable air filters reduce costly callouts.
    • Exceptionally hard crystal clear cubes that melt slowly.
    • Auto rinse and flush cycle.
    • 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 85kg @10°C Air temp; 10°C WaterApprox. 83kg @21°C Air temp; 15°C Water

    Approx. 73kg @32°C Air temp; 21°C Water

    Max Storage Capacity Approx. 38kg
    Freeze Cycle Time Approx. 29 Min
    Ice Production Per cycle Approx. 1.8kg/80pcs
    Width 1004mm
    Depth 600mm
    Height 800mm (Includes 90mm-125mm Legs)
    Weight Net 77kg
    Packed Weight 88kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMp Plug
    Amperage Running: 4.1A Rated: 4.1A Starting: 19A
    Refrigerant Charge R134a / 290g
    Operating Conditions Ambient Temp.: 1-40°CWater Supply Temp.: 5-35°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,327.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-130CNE-28 SC

    • New intelligent control circuit dedicated to saving power and water consumption.
    • Micro computer controller controls ice making process to work at peak performance in any conditions.
    • Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.
    • New 7 segment operational display panel for ease of use.
    • Unique closed cell water circuit for ultimate contamination protection.
    • Durable stainless steel exterior.
    • Easily accessible and cleanable air filters reduce costly callouts.
    • Exceptionally hard crystal clear cubes that melt slowly.
    • Auto rinse and flush cycle.
    • 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 100kg @10°C Air temp; 10°C Water

    Approx. 104kg @21°C Air temp; 15°CWater

    Approx. 88kg @32°C Air temp; 21°C Water

    Max Storage Capacity Approx. 50kg (Bin Control Setting Approx.28kg)
    Freeze Cycle Time Approx. 22 Min
    Ice Production Per cycle Approx. 1.8kg/80pcs
    Width 704mm
    Depth 506mm
    Height 1270mm (Includes 70mm-110mm Legs)
    Weight Net 76kg
    Packed Weight 85kg
    Cooling Air
    AC Supply Voltage 1  PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 4.5A Rated: 4.5A Starting: 19A
    Refrigerant Charge R404A / 380g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,830.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-240ANE-28 B

    New intelligent control circuit dedicated to saving power and water consumption.Micro computer controller controls ice making process to work at peak performance in any conditions.Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.New 7 segment operational display panel for ease of use.Unique closed cell water circuit for ultimate contamination protection.Durable stainless steel exterior.Easily accessible and cleanable air filters reduce costly callouts.Exceptionally hard crystal clear cubes that melt slowly.Auto rinse and flush cycle.3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.Achieved by stacking 2 units side by side

    Production Capacity per 24hours Approx. 220kg @10°C Air temp; 10°C Water

    Approx. 205kg @21°C Air temp; 15°C Water

    Approx. 160kg @32°C Air temp; 21°C Water

    Max Storage Capacity 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin
    Freeze Cycle Time Approx. 20 Min
    Ice Production Per cycle Approx. 3.2kg/140pcs
    Width 560mm
    Depth 700mm
    Height 880mm
    Weight Net 80kg
    Packed Weight 95kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 6.6A Rated: 6.6A Starting: 35A
    Refrigerant Charge R404A / 480g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $8,055.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-240DNE-28 B

    New intelligent control circuit dedicated to saving power and water consumption.New 7 segment operational display panel for ease of use.Environmentally hard crystal clear cubes that melt slowly.Unique closed cell water circuit for ultimate contamination protection.Auto rinse and flush cycle.Micro computer controller controls ice making process to work at peak performance in any conditions.Easily accessible and cleanable air filters reduce costly callouts.Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.Rated to 43°C ambient temperature (tropical conditions).Durable stainless steel exterior.3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.Achieved by stacking these units on top of each other.

    Production Capacity per 24hours Approx. 220kg @10°C Air temp; 10°C Water

    Approx. 205kg @21°C Air temp; 15°C Water

    Approx. 160kg @32°C Air temp; 21°C Water

    Max Storage Capacity 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin
    Freeze Cycle Time Approx. 19 Min
    Ice Production Per cycle Approx. 3.2kg/140pcs
    Width 1084mm
    Depth 700mm
    Height 500mm
    Weight Net 88kg
    Packed Weight 104kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 6.6A Rated: 6.6A Starting: 35A
    Refrigerant Charge R404A / 480g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin 96000010 Top Kit

     

    $6,400.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-240CNE-28 SC

    New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 220kg @10°C Air temp; 10°C Water

    Approx. 205kg @21°C Air temp; 15°C Water

    Approx. 160kg @32°C Air temp; 21°C Water

    Max Storage Capacity Approx. 110kg
    Freeze Cycle Time Approx. 20 Min
    Ice Production Per cycle Approx. 3.2kg/140pcs
    Width 704mm
    Depth 665mm
    Height 1580mm (Includes 70mm-110mm Legs)
    Weight Net 111kg
    Packed Weight 128kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 6.6A Rated: 6.6A Starting: 35A
    Refrigerant Charge R404A / 500g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $8,055.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    30CNE-25 SC

    New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 22kg @10°C Air temp; 10°C Water

    Approx. 18kg @21°C Air temp; 15°C Water

    Approx. 15kg @32°C Air temp; 21°C Water

    Max Storage Capacity Approx. 11.5kg (Bin Control Setting Approx.6kg)
    Freeze Cycle Time Approx. 19 Min
    Ice Production Per cycle
    Approx. 0.27kg/21pcs
    Width 398mm
    Depth 451mm
    Height 787mm (Includes 92mm-127mm Legs)
    Weight Net 34kg
    Packed Weight 39kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 1.7A Rated: 1.7A Starting: 10A
    Refrigerant Charge R134a / 130g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $2,579.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-45CNE-25

    New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 35kg @10°C Air temp; 10°C Water

    Approx. 32kg @21°C Air temp; 15°C Water

    Approx. 27kg @32°C Air temp; 21°C Water

    Max Storage Capacity Approx. 15kg (Bin Control Setting Approx.8kg)
    Freeze Cycle Time Approx. 22 Min
    Ice Production Per cycle
    Approx. 0.55kg/42pcs
    Width 633mm
    Depth 511mm
    Height 780mm (Includes 90mm-125mm Legs)
    Weight Net 48kg
    Packed Weight 56kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 2.4A Rated: 2.4A Starting: 13A
    Refrigerant Charge R134a / 160g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $3,378.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-65NE-25 SC

    New intelligent control circuit dedicated to saving power and water consumption. Micro computer controller controls ice making process to work at peak performance in any conditions. Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector. New 7 segment operational display panel for ease of use. Unique closed cell water circuit for ultimate contamination protection. Durable stainless steel exterior. Easily accessible and cleanable air filters reduce costly callouts. Exceptionally hard crystal clear cubes that melt slowly. Auto rinse and flush cycle. 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx.45kg @10°C Air temp; 10°C Water

    Approx. 44kg @21°C Air temp; 15°C Water

    Approx. 37kg @32°C Air temp; 21°C Water

    Max Storage Capacity
    Approx. 26kg ( Bin Control Settings Approx.18 Kg)
    Freeze Cycle Time Approx. 22 Min
    Ice Production Per cycle Approx. 0.72kg/56pcs
    Width 633mm
    Depth 506mm
    Height 930mm (Includes 90mm-125mm Legs)
    Weight Net 53kg
    Packed Weight 61kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 2.9A Rated: 2.9A Starting: 17A
    Refrigerant Charge R134a / 200g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $3,779.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KM-140C HC SC

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit.

    Production Capacity per 24hours Approx. 138kg @ 10°C Air temp; 10°C Water Approx. 130kg @ 21°C Air temp; 15°C Water Approx. 115kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx. 55kg
    Freeze Cycle Time Approx. 21min
    Ice Production Per cycle
    Approx. 1.87kg / 208pcs
    Width 63-mm
    Depth 719mm
    Height 133mm
    Weight Net 69kg
    Packed Weight 81kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 3.9A Starting: 18.6A
    Refrigerant Charge R290/110g
    Operating Conditions Ambient Temp.: 1-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,029.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KM-40C HC SC

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit.

    Production Capacity per 24hours Approx. 41kg @ 21°C Air temp; 15°C Water Approx. 33kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx. 16kg
    Freeze Cycle Time Approx. 23min
    Ice Production Per cycle
    Approx. 0.71kg / 80pcs
    Width 452mm
    Depth 610mm
    Height 988mm
    Weight Net 39kg
    Packed Weight 49kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 1.4A Starting: 7.7A
    Refrigerant Charge R290/68g
    Operating Conditions Ambient Temp.: 7-38°C Water Supply Temp.: 7-32°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $2,238.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KM-60C HC SC

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit.

    Production Capacity per 24hours Approx. 60kg @ 10°C Air temp; 10°C Water Approx. 52kg @ 21°C Air temp; 15°C Water Approx. 37kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx. 23kg
    Freeze Cycle Time Approx. 26min
    Ice Production Per cycle
    Approx. 0.96kg / 110pcs
    Width 605mm
    Depth 610mm
    Height 988mm
    Weight Net 45kg
    Packed Weight 57kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 1.6A Starting: 8.5A
    Refrigerant Charge R290/90g
    Operating Conditions Ambient Temp.: 7-38°C Water Supply Temp.: 7-32°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $2,727.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KM-80C HC SC

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter at front for easy cleaning -maintaining performance efficiency. Double-sided stainless steel evaporator for all water conditions -produces more ice in less cycles. Flush mount to rear wall. Good in hard water areas. Snap in water tank design – easy to remove for sanitization. Low electrical consumption. Low water consumption. LED lights and audible alarms. 3 year parts and labour warranty on entire unit.

    Production Capacity per 24hours Approx. 75kg @ 10°C Air temp; 10°C Water Approx. 68kg @ 21°C Air temp; 15°C Water Approx. 55kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx. 34kg
    Freeze Cycle Time Approx. 23min
    Ice Production Per cycle
    Approx. 1.15kg / 130pcs
    Width 605-mm
    Depth 712mm
    Height 988mm
    Weight Net 50kg
    Packed Weight 63kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 2.1A Starting: 12.5A
    Refrigerant Charge R290/147g
    Operating Conditions
    Ambient Temp.: 7-38°C Water Supply Temp.: 7-32°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000104 Low capacity Water Filter System 87000106 320mm Replacement Cartridge 87000148 Water Filter Kit & Guage 87000146 Water Filter 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $3,612.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KMD-201AB(SS) B

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter for easy cleaning – maintaining performance efficiency. Patented double sided stainless steel evaporator fro all water conditions – produces more ice in less cycles. Audible alarms. 3 year parts & labour on entire unit, 5 year parts & labour on the evaporator,5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 200kg @ 10°C Air temp; 10°C Water Approx. 175kg @ 21°C Air temp; 15°C Water Approx. 140kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin 91000130 Dispenser 91000100 Hotel/Motel Ice Dispenser 91000063 Dispenser 91000131 Dispenser
    Freeze Cycle Time Approx. 30.5min
    Ice Production Per cycle
    Approx. 3.7kg / 416pcs
    Width 560mm
    Depth 625mm
    Height 610mm
    Weight Net 57kg
    Packed Weight 73kg
    Cooling Air
    AC Supply Voltage
    1 PHASE 220-240/230V 50/60 Hz
    Amperage Running: 3.0A Starting: 25A
    Refrigerant Charge R404A/520g
    Operating Conditions Ambient Temp.: 7-40°C Water Supply Temp.: 7-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin 96000006 Top Kit 96000007 Top Kit 96000008 Top Kit 64000088 Top Kit 91000130 Dispenser 91000100 Hotel/Motel Ice Dispenser 91000063 Dispenser 96000009 Top Kit 87000123 Water Filter Kit Twin 450mm cartridges 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg 91000131 Dispenser

     

    $5,019.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    KMD-270AB B

    Individual premium crescent cube with no ice bridging. Exceptionally hard crystal clear cubes that melt slowly. Durable stainless steel exterior. Slide in air filter for easy cleaning – maintaining performance efficiency. Patented double sided stainless steel evaporator fro all water conditions – produces more ice in less cycles. Audible alarms. 3 year parts & labour on entire unit, 5 year parts & labour on the evaporator,5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours
    Approx. 275kg @ 10°C Air temp; 10°C Water Approx. 255kg @ 21°C Air temp; 15°C Water Approx. 221kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin 91000130 Dispenser 91000100 Hotel/Motel Ice Dispenser 91000063 Dispenser 91000131 Dispenser
    Freeze Cycle Time Approx. 26.8min
    Ice Production Per cycle
    Approx. 5.3kg / 572pcs
    Width 560mm
    Depth 625mm
    Height 610mm
    Weight Net 57kg
    Packed Weight 73kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage Running: 4.9A Starting: 24A
    Refrigerant Charge R404A/780g
    Operating Conditions Ambient Temp.: 7-40°C Water Supply Temp.: 7-35°C Water Supply Pressure: 0.07-0.8MPa (0.7-8bar) Voltage Range: Rated Voltage ±6%
    Additional Parts 91000025 Ice Storage Bin 91000026 Ice Storage Bin 91000027 Ice Storage Bin 91000053 Ice Storage Bin 91000054 Ice Storage Bin 96000006 Top Kit 96000007 Top Kit 96000008 Top Kit 64000088 Top Kit 91000130 Dispenser 91000100 Hotel/Motel Ice Dispenser 91000063 Dispenser 96000009 Top Kit 87000123 Water Filter Kit Twin 450mm cartridges 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg 91000131 Dispenser

     

    $5,525.00 exc gst & delivery

    Add to Cart
  • RT-126MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 231L
    Temperature Control Microprocessor controlled Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 840mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 71kg
    Packed Weight 76kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.0A
    Refrigerant R134a/240g
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 245W, Heater 187W, Defrost 165W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $2,707.00 exc gst & delivery

    Add to Cart

Maintain a Healthy Lifestyle

Keep your water purified