shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • Sale!

    Hoshizaki HR-78MA-A SS1FZsplit 569L

    HR-78MA-A SS1FZsplit

    • Stainless steel interior and exterior.
    • Split doors on Upright series.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Standard with 4 x shelves.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 569L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 700mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 596mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 104kg
    Packed Weight 126kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.1A Starting:8.5A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 469W, Heater 426W, Defrost 426W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,292.00.Current price is: $3,497.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki HF-128MA-A SS2UFZ 1047L

    HF-128MA-A SS2UFZ

    • Split doors and Upright series.
    • Stainless steel interior and exterior.
    • Programmable electronic controller and display.
    • Standard with 8 x shelves.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Top,Rear/Bottom)
    Max Storage Capacity 1047L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 1096mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 149kg
    Packed Weight 180kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.9A Starting: 15.6A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 700W, Heater 474W, Defrost 474W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,308.00.Current price is: $4,829.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTE-120SDA-GN-ML SS2FZP 265L

    FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor controlled Adjustable from -25 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,808.10.Current price is: $3,837.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTE-120SD-GN SS2FZ 265L

    FTE-120SD-GN SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor adjustable from -25°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,270.83.Current price is: $3,483.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTC-90DEA-GN-3D SS3DFZ 160L

    FTC-90DEA-GN-3D SS3DFZ

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 3 x Auto closing drawers.
    • Fits GN pans 100mm Deep.
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs)
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity 160L
    Temperature Control Microprocessor adjustable from -25°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 900mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm
    Inside Dimensions Width 530mm
    Inside Dimensions Depth 533mm
    Inside Dimensions Height 588mm
    Weight Net 86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 PHASE 220-240V 50Hz/10 Amp Plug
    Amperage Rated: 3.0A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Heater 362W, Defrost 362W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,670.00.Current price is: $5,068.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FT-186MA-A SS3FZ 401L

    FT-186MA-A SS3FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 401L
    Temperature Control Microprocessor adjustable from -23°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1800mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 1440mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 93kg
    Packed Weight 98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.7A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 357W, Heater 397W, Defrost 330W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,428.00.Current price is: $3,586.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FT-126MA-A SS2FZ 231L

    FT-126MA-A SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 231L
    Temperature Control Microprocessor controlled Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 840mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 72kg
    Packed Weight 77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.6A
    Refrigerant R404A/160g
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 342W, Heater 371W, Defrost 330W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $4,692.00.Current price is: $3,100.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Frost H&C water cooler direct

    Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.

    • Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
    • Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
    • Hot Water Safety Lock: Provides safety assurance for users.

    Cold Water Supply
    		2-3L/H (≤10℃)
    Connection

    Heating Power
    Direct Connect
    550W
    Cooling Power
    		90W
    Filter Activated Carbon, PP Sediment
    Hot Water Supply  5L/H(≥90℃)
    Voltage 220V - 50Hz
    Weight 16kg
    Working Ambient
    		10 – 32℃

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $550.00.Current price is: $480.00. ex. GST

    13% Off

    Add to cart
  • Sale!

    Frost 20L SS Square Drinking Fountain

    Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Filtered Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

     

    Cold Water Supply
    		20L/H (8-12°C)
    Cold Water Temp
    8-12°C
    Cooling Power
    		200W
    Filter Activated Carbon, PP Sediment
    Material Stainless Steel SUS304
    Measurements 99cm H x 30cm W x 30cm D
    Bubbler Height 7cm
    Tap Height
    		25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. ex. GST

    17% Off

    Add to cart
  • Sale!

    Frost 20L SS Cylinder Drinking Fountain

    Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.

    Cold Water Supply
    		20L/H(8-12°C)
    Cold Water Temp
    8-12°C
    Material
    		Stainless Steel SUS304
    Power Supply 220-240V / 50-60Hz
    Refrigerant  R290 60g
    Bubbler Height 7cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. ex. GST

    17% Off

    Add to cart
  • Sale!

    Oasis Refillable Water Cooler – Ambient & Cold (Eco Package)

    The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
    • 4L internal water storage tank
    • 10L eco-friendly refillable filtered bottle.
    • Heavy-duty stainless steel side panels
    • Durable, self-closing taps
    • Easy-to-clean, removable drip tray

    WATER RESERVOIR Cold: 4 L
    HOUSING MATERIAL Plastic with stainless steel side panels and corner pieces
    REFRIGERATION Uses R134a refrigerant
    THERMOSTAT CONTROL The thermostat is factory set
    CAPACITY Cold: 5 L/h
    ELECTRICAL POWER USE Cold: 100 W
    ELECTRICAL  220-240V, 50/60Hz
    WARRANTY 12-month comprehensive coverage, additional 24-month compressor replacement

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $420.00.Current price is: $365.00. ex. GST

    13% Off

    Add to cart
  • Sale!

    Odyssey Bottled Countertop Water Cooler (Eco Package)

    The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • Cold water chills to approx. 5°C
    • Stylish front façade made from high quality durable plastic, coupled with steel side panels for strength
    • Compact design, ideal for homes, apartments, home offices and more.
    • Easy-to-use taps, only one hand required
    • Food-grade, stainless steel tank and water contact tubes
    • Durable polypropylene, self-closing taps
    • Easy-to-clean, removable drip tray
    • 12-month standard warranty and additional 24-month refrigeration system coverage
    • Full range of replacement parts

    WATER RESERVOIR Cold: 2.5L
    HOUSING MATERIAL High-quality durable plastic with steel side panels
    REFRIGERATION Used R134a refrigerant
    THERMOSTAT CONTROL The thermostat is factory set
    CAPACITY Cold: 2.5 L/h
    POWER CONSUMPTION Cold: 85W
    ELECTRICAL 220-240V, 50/60Hz
    WEIGHT (PACKED) 10 kg
    DIMENSIONS (PACKED)  535 x 360 x 290 mm (HxWxD)
    WARRANTY 12-month comprehensive coverage. Additional 24-month refrigeration system coverage.

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to direct sunlight or other sources of heat.
    3. It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10 cm of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of your water cooler.

    Install

    1. Make sure the water dispenser is not plugged into an electrical outlet.
    2. Remove the bottle support by twisting in the direction specified to access tank
    3. Flush tank with water and wipe with soft cloth
    4. Insert the water bottle vertically on the bottle support/spike of the water dispenser.
    5. Wait until the tanks fill with water. Press the cold water tap down until water begins to flow. Press the hot water tap (if applicable) down until water begins to flow.
    6. Flush through 5L of water to ensure lines are cleaned. More may be required if taste is strange. Once flushed, ensure the cooler tanks are full of water before moving to step 7.
    7. Insert the power plug into an electrical outlet.
    8. Turn the electric switches to ON position to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME. ENSURE STEP THREE IS COMPLETED FIRST
    9. Indicator lights on front should light up. The appliance is designed to provide water whenever you need it. It will automatically turn on and off when the water reaches the desired temperatures. The indicator lights will not show all the time.
    10. When heating light turns off, the heating tank is at temperature. Make sure to drain the hot tank through the tap after the first heating cycle and dispose of water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $350.00.Current price is: $270.00. ex. GST

    23% Off

    Add to cart

Maintain a Healthy Lifestyle

Keep your water purified