shop with the ultimate water solutions store!
Peruse our beautiful range of classy products.
Filter your Search
- Sale!
RTC-90DEA-GN-2D SS2DF
- Stainless steel interior and exterior.
- Programmable Digital controller and display.
- 2 x Auto closing drawers.
- Fits GN pans 150mm Deep
- Compact slide out refrigeration unit for quick maintenance.
- 2 years parts and labour warranty.
- Comes standard with 115mm lockable castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic Exterior Stainless Steel, Galvanized Steel (Rear /Bottom) Max Storage Capacity 160L Temperature Control Microprocessor controlled Adjustable from -6 to 12°C Evaporator Fin & Tube type Outside Dimensions Width 900mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm Inside Dimensions Width 530mm Inside Dimensions Depth 533mm Inside Dimensions Height 588mm Weight Net 77kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 1.5A Refrigerant R134a/160g Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Heater 181W, Defrost 181W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$7,355.38Original price was: $7,355.38.$4,860.00Current price is: $4,860.00. ex. GST34% Off
- Sale!
RTE-120SDA-GN SS2F
- Stainless steel interior and exterior.
- Programmable Digital controller and display.
- 4 x 1/1 Gastronorm adjustable shelves with rails
- Compact slide out refrigeration unit for quick maintenance.
- 2 years parts and labour warranty.
- Comes standard with 4 x 115mm lockable castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately)
Interior Stainless Steel, ABS Plastic Exterior Stainless steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 265L Temperature Control Microprocessor controlled Adjustable from -6 to 12°C Evaporator Fin & Tube type Outside Dimensions Width 1200mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 830mm Inside Dimensions Depth 527mm Inside Dimensions Height 588mm Weight Net 83kg Packed Weight 93kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 1.4A Refrigerant R134a Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Motor 195W (Power Factor 60%), Heater 192W, Refrigeration 222W, Defrost 199W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,286.96Original price was: $5,286.96.$3,493.00Current price is: $3,493.00. ex. GST34% Off
- Sale!
RTE-120SDA-GN-ML SS2FP
This Pillar Less range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Standard with 4 shelves / 2 doors. Programmable electronic controller and display. 2 years parts and labour warranty. Comes standard with 4 x lockable (115 mm) castors (not legs).
Interior Stainless Steel, ABS Plastic (Doors) Exterior Stainless Steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 265L Temperature Control Microprocessor controlled Adjustable from -6 to 12°C Evaporator Fin & Tube type Outside Dimensions Width 1200mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 830mm Inside Dimensions Depth 527mm Inside Dimensions Height 588mm Weight Net 83kg Packed Weight 93kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 1.4A Refrigerant R134a Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption 195W, Heater 192W, Refrigeration 222W Defrost 199W* Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$5,354.16Original price was: $5,354.16.$3,538.00Current price is: $3,538.00. ex. GST34% Off
- Sale!
RTE-170SDA-GN SS3F
- Stainless steel interior and exterior.
- Programmable Digital controller and display.
- 4 x 1/1 Gastronorm adjustable shelves with rails
- Compact slide out refrigeration unit for quick maintenance.
- 2 years parts and labour warranty.
- Comes standard with 4 x 115mm lockable castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately)
Interior Stainless Steel, ABS Plastic Exterior Stainless steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 412L Temperature Control Microprocessor controlled Adjustable from -6 to 12°C Evaporator Fin & Tube type Outside Dimensions Width 1660mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 1290mm Inside Dimensions Depth 527mm Inside Dimensions Height 588mm Weight Net 103kg Packed Weight 115kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 1.34A Starting: 6.8A Refrigerant R134a/170g Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Motor 195W (Power Factor 65%), Heater 200W, Refrigeration 223W, Defrost 200W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$6,398.78Original price was: $6,398.78.$4,228.00Current price is: $4,228.00. ex. GST34% Off
- Sale!
RTE-170SDA-GN-ML SS3FP
With no centre pillar you can use trays and containers of varying sizes. This Pillar Less range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Standard with 6 shelves / 3 doors. Programmable electronic controller and display. 2 years parts and labour warranty. Comes standard with 4 x lockable (115 mm) castors (not legs). Optional Adjustable legs 150 – 180mm (Sold separately).
Interior Stainless Steel, ABS Plastic Exterior Stainless Steel, Galvanized Steel (Rear/Bottom) Max Storage Capacity 412L Temperature Control Microprocessor controlled Adjustable from -6 to 12°C Evaporator Fin & Tube type Outside Dimensions Width 1660mm Outside Dimensions Depth 700mm Outside Dimensions Height 815mm (Includes 115mm Castors) Inside Dimensions Width 1290mm Inside Dimensions Depth 527mm Inside Dimensions Height 588mm Weight Net 103kg Packed Weight 115kg Refrigeration System Forced Air Circulation AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug Amperage Rated: 1.4A Refrigerant R134a Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6% Electrical Consumption Motor 195W (Power Factor 65%), Heater 202W, Refrigeration 242W, Defrost 209W Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each) Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$6,776.78Original price was: $6,776.78.$4,478.00Current price is: $4,478.00. ex. GST34% Off
- Sale!
All ice machines must have a filter installed, optional filter kit will be quoted on.
IM-ZB-20F-SS
- High ice-making capacity to make up to 12kg of ice per 24 hours
- Produce 24 ice cubes in one cycle (14-19 minutes)
- 3 ice cube thickness levels for selection
- Simple control panel for easy operation
- Automatic self-cleaning
- Choose between bottled water hookup (not included) or manual reservoir fill
- Water shortage and ice full alarm system
- Transparent window to inspect ice making process
- Quiet operation
- Freon-free refrigerant and enhanced heat dissipation enable low energy consumption
- Compact and portable countertop design
- Ice scoop and removable basket included
- Daily ice production: up to 20kg
- Ice bin capacity: 1.2kg
- Ice shape: Cubed ice
- Ice making capacity per cycle: 24 cubes per cycle
- Production cycle: 13-18 minutes, depending on thickness and ambient temperatures
- Self-cleaning Function: 3.2L
- Water tank capacity: 3.2L
- Full ice bin alarm: Yes
- Low water alarm: Yes
- Voltage: AC 220-240V/ 50-60Hz
- Power rating: 160W
- Overall dimensions:36cm x 25cm x 37cm
- Primary Material: Stainless steel
- Colour: Silver
- Assembly required: No
- No. of package: 1
Devanti Ice Maker x1 Ice scoop x1 User manual x1
$499.99Original price was: $499.99.$291.00Current price is: $291.00. ex. GST42% Off
Provide guests and staff with clean, great-tasting filtered water through a modern, in-wall dispensing system designed for professional environments. This touch-free unit is ideal for offices, hotels, and shared spaces, helping eliminate the need for bulky bottled water deliveries while saving storage space and reducing plastic waste.
- Designed for installation in high-use areas such as conference rooms, lobbies, waiting areas, and staff break rooms
- Slim, in-wall form factor fits easily between standard wall studs near existing water and electrical connections
- Integrated drip tray with optional drain hookup for tidy and convenient use
- NSF-certified filtration system reduces lead and other common contaminants (filter housing and remote filter cable supplied; installation optional)
- Multi-colour LED indicator lights clearly display when filter replacement is required
- Illuminated Green Ticker® display tracks the number of single-use plastic bottles avoided
- Self-service, user-friendly dispensing for convenient and sustainable hydration
- Touchless activation with an automatic shut-off timer to minimise spills and water waste
- Premium glass front with brushed stainless steel finish and interactive lighting that brightens during use
- Compatible with optional chiller systems (sold separately) for chilled or ambient water applications
- Optional lockout feature helps prevent unauthorised or unsupervised use
Number of Stations 1 Type Water Dispensers Features Ambient Water Automatic Filter Status Reset Filtered Green Ticker? Hands Free Laminar Flow Visual Filter Monitor Power 115V/60Hz Dimensions L:?5-1/8" W:?18" H:?28" Mounting Option Wall Mount (Inwall Frame/Plate) Chilling Capacity Non-refrigerated Installation Location Indoor Application Type Hospitality Shipping Dimensions L:?29" W:?19" H:?9" Shipping Weight 41?LBS Included with Product Water Dispenser SS Filter Box Remote Filter Cable 3000 Gal Filter Family ezH2O Liv Pro ADA Yes Filtered Yes Code Compliance Drinking Solutions ADA & ICC A117.1 CAN/CSA C22.2 No. 120 NSF 372 (lead free) NSF 42 NSF 53 NSF 61 UL 399 NSF 401 Note If the water dispenser is installed with a remote chiller, the filter should also be installed remotely near the chiller. $4,037.50 ex. GST
- Sale!
Maximus is the largest capacity commercial water cooler range available on the Australian market. No other water cooler in its class presents the same level of performance, making Maximus the ideal choice for high-demand areas like offices and workshops.
- Highest capacity water cooler available in Australia
- Stainless steel side panels and corner pieces for heavier-duty applications
- Durable polypropylene, self-closing taps
- Food-grade, stainless steel water contact tubes
- Easy-to-clean, removable drip tray
- 12 month standard warranty and 36 month compressor warranty
- Full range of replacement parts
AC-XMCC
$509.25Original price was: $509.25.$446.00Current price is: $446.00. ex. GST12% Off
- Sale!
The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.
- 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
- 4L internal water storage tank
- 10L eco-friendly refillable filtered bottle.
- Heavy-duty stainless steel side panels
- Durable, self-closing taps
- Easy-to-clean, removable drip tray
WATER RESERVOIR Cold: 4 L HOUSING MATERIAL Plastic with stainless steel side panels and corner pieces REFRIGERATION Uses R134a refrigerant THERMOSTAT CONTROL The thermostat is factory set CAPACITY Cold: 5 L/h ELECTRICAL POWER USE Cold: 100 W ELECTRICAL 220-240V, 50/60Hz WARRANTY 12-month comprehensive coverage, additional 24-month compressor replacement Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$420.00Original price was: $420.00.$365.00Current price is: $365.00. ex. GST13% Off
- Sale!
The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.
- 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
- 2.0L/h hot water heating capacity
- 4L internal water storage tank
- 10L eco-friendly refillable filtered bottle.
- Heavy-duty stainless steel side panels
- Durable, self-closing taps
- Stainless steel housing
- Easy-to-clean, removable drip tray
WATER RESERVOIR Cold: 4L | Hot 1.2L HOUSING MATERIAL Plastic with stainless steel side panels and corner pieces REFRIGERATION Use R134a refrigerant THERMOSTAT CONTROL The thermostat is factory set CAPACITY Cold: 5L/h | Hot 2L/h ELECTRICAL POWER USE Cold: 100W | Hot 400-800W ELECTRICAL 220,240 V, 50/60 Hz WARRANTY 12-month comprehensive coverage, additional 24-month compressor replacement. Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$450.00Original price was: $450.00.$395.00Current price is: $395.00. ex. GST12% Off
- Sale!
This stylish range of stainless-steel water coolers is the perfect addition to a modern kitchen, spacious living room or small office.
- Stylish stainless steel housing
- External heating element offers greater efficiency and avoids calcium build up
- Durable polypropylene, self-closing taps
- Food-grade, stainless steel water contact tubes
- Easy-to-clean, removable drip tray and non-spill system
- 12-month standard warranty and 36-month compressor warranty
Bottled Water Cooler Mains Connected Water Cooler
$446.25Original price was: $446.25.$381.00Current price is: $381.00. ex. GST15% Off
