shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • Sale!

    Hoshizaki RT-126MA-A SS2F 231L

    RT-126MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity231L
    Temperature ControlMicroprocessor controlled Adjustable from -6 to 12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width840mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net71kg
    Packed Weight76kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.0A
    RefrigerantR134a/240g
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption245W, Heater 187W, Defrost 165W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $4,513.82.Current price is: $2,982.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki HR-78MA-A SS1FZsplit 569L

    HR-78MA-A SS1FZsplit

    • Stainless steel interior and exterior.
    • Split doors on Upright series.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Standard with 4 x shelves.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity569L
    Temperature ControlMicroprocessor Adjustable from -23 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width700mm
    Outside Dimensions Depth800mm
    Outside Dimensions Height2015mm
    Inside Dimensions Width596mm
    Inside Dimensions Depth646mm
    Inside Dimensions Height1484mm
    Weight Net104kg
    Packed Weight126kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 4.1A Starting:8.5A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption469W, Heater 426W, Defrost 426W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,292.00.Current price is: $3,497.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki HF-128MA-A SS2UFZ 1047L

    HF-128MA-A SS2UFZ

    • Split doors and Upright series.
    • Stainless steel interior and exterior.
    • Programmable electronic controller and display.
    • Standard with 8 x shelves.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Top,Rear/Bottom)
    Max Storage Capacity1047L
    Temperature ControlMicroprocessor Adjustable from -23 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth800mm
    Outside Dimensions Height2015mm
    Inside Dimensions Width1096mm
    Inside Dimensions Depth646mm
    Inside Dimensions Height1484mm
    Weight Net149kg
    Packed Weight180kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 4.9A Starting: 15.6A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption700W, Heater 474W, Defrost 474W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,308.00.Current price is: $4,829.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTE-120SDA-GN-ML SS2FZP 265L

    FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity265L
    Temperature ControlMicroprocessor controlled Adjustable from -25 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width830mm
    Inside Dimensions Depth527mm
    Inside Dimensions Height588mm
    Weight Net87kg
    Packed Weight97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.8A
    RefrigerantR404A/200g
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionMotor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,808.10.Current price is: $3,837.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTE-120SD-GN SS2FZ 265L

    FTE-120SD-GN SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity265L
    Temperature ControlMicroprocessor adjustable from -25°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width830mm
    Inside Dimensions Depth527mm
    Inside Dimensions Height588mm
    Weight Net87kg
    Packed Weight97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.8A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionMotor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,270.83.Current price is: $3,483.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTC-90DEA-GN-3D SS3DFZ 160L

    FTC-90DEA-GN-3D SS3DFZ

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 3 x Auto closing drawers.
    • Fits GN pans 100mm Deep.
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs)
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity160L
    Temperature ControlMicroprocessor adjustable from -25°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width900mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm
    Inside Dimensions Width530mm
    Inside Dimensions Depth533mm
    Inside Dimensions Height588mm
    Weight Net86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 PHASE 220-240V 50Hz/10 Amp Plug
    AmperageRated: 3.0A
    RefrigerantR404A/200g
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionHeater 362W, Defrost 362W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,670.00.Current price is: $5,068.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FT-186MA-A SS3FZ 401L

    FT-186MA-A SS3FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity401L
    Temperature ControlMicroprocessor adjustable from -23°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1800mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width1440mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net93kg
    Packed Weight98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.7A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption357W, Heater 397W, Defrost 330W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,428.00.Current price is: $3,586.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FT-126MA-A SS2FZ 231L

    FT-126MA-A SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity231L
    Temperature ControlMicroprocessor controlled Adjustable from -23 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width840mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net72kg
    Packed Weight77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.6A
    RefrigerantR404A/160g
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption342W, Heater 371W, Defrost 330W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $4,692.00.Current price is: $3,100.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Frost H&C water cooler direct

    Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.

    • Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
    • Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
    • Hot Water Safety Lock: Provides safety assurance for users.

    Cold Water Supply
    		2-3L/H (≤10℃)
    Connection

    Heating Power

    Direct Connect
    550W
    Cooling Power
    		90W
    FilterActivated Carbon, PP Sediment
    Hot Water Supply 5L/H(≥90℃)
    Voltage220V - 50Hz
    Weight16kg
    Working Ambient
    		10 – 32℃

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $550.00.Current price is: $480.00. ex. GST

    13% Off

    Add to cart
  • Sale!

    Oasis Refillable Water Cooler – Hot & Cold (Eco Package)

    The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
    • 2.0L/h hot water heating capacity
    • 4L internal water storage tank
    • 10L eco-friendly refillable filtered bottle.
    • Heavy-duty stainless steel side panels
    • Durable, self-closing taps
    • Stainless steel housing
    • Easy-to-clean, removable drip tray

    WATER RESERVOIRCold: 4L     |     Hot 1.2L
    HOUSING MATERIALPlastic with stainless steel side panels and corner pieces
    REFRIGERATIONUse R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 5L/h     |     Hot 2L/h
    ELECTRICAL POWER USECold: 100W     |     Hot 400-800W
    ELECTRICAL220,240 V, 50/60 Hz
    WARRANTY12-month comprehensive coverage, additional 24-month compressor replacement.

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $450.00.Current price is: $395.00. ex. GST

    12% Off

    Add to cart
  • Sale!

    Oasis Refillable Water Cooler – Ambient & Cold (Eco Package)

    The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 5.0L/h cold water chilling capacity (Cold water chills to approx. 5°C)
    • 4L internal water storage tank
    • 10L eco-friendly refillable filtered bottle.
    • Heavy-duty stainless steel side panels
    • Durable, self-closing taps
    • Easy-to-clean, removable drip tray

    WATER RESERVOIRCold: 4 L
    HOUSING MATERIALPlastic with stainless steel side panels and corner pieces
    REFRIGERATIONUses R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 5 L/h
    ELECTRICAL POWER USECold: 100 W
    ELECTRICAL 220-240V, 50/60Hz
    WARRANTY12-month comprehensive coverage, additional 24-month compressor replacement

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $420.00.Current price is: $365.00. ex. GST

    13% Off

    Add to cart

  • Odyssey Refillable Water Cooler (Eco Package)

    The Odyssey Series offers unparalleled value in bottled countertop water coolers in both cook-and-cold and hot-and-cold configurations.

    • 2.5L/hour cold water chilling capacity
    • Cold water chills to approx. 5°C
    • Includes 10L refillable, filtered water bottle
    • Stylish front façade made from high-quality materials
    • Self-closing taps, operate with just one hand
    • Easy-to-clean with removable drip tray
    • 12-month standard warranty / 36-month refrigeration circuit warranty

    WATER RESERVOIRCold: 2.5L
    HOUSING MATERIALHigh-quality durable plastic with steel side panels
    REFRIGERATIONUsed R134a refrigerant
    THERMOSTAT CONTROLThe thermostat is factory set
    CAPACITYCold: 2.5L/h
    POWER CONSUMPTIONCooling: 85 W
    ELETRICAL220-240V, 50/60 Hz
    WEIGHT (PACKED)15kg
    DIMENSIONS (PACKED)1035 x 360 x 290 mm (HxWxD)
    WARRANTY12-month comprehensive coverage, additional 24-month compressor replacement.

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to direct sunlight or other sources of heat.
    3. It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10 cm of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of your water cooler.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Make sure the water dispenser is not plugged into an electrical outlet.
    3. Insert the water bottle vertically on the seat into the non-spill system of the water dispenser.
    4. Press the cold water tap down until water begins to flow.
    5. Insert the power plug into an electrical outlet.
    6. Turn the electric switches to ON position to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME.
    7. Cooling indicator lights should light up. The appliance is designed to supply cook or cold water whenever you need it. It will automatically turn on and off when the water reaches the desired temperatures

    Data_Sheet User_Manual Drinking_Water_Solutions

    Enquire Now

Maintain a Healthy Lifestyle

Keep your water purified