shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • RTE-120SDA-GN-ML SS2FP

    This Pillar Less range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Standard with 4 shelves / 2 doors. Programmable electronic controller and display. 2 years parts and labour warranty. Comes standard with 4 x lockable (115 mm) castors (not legs).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless Steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor controlled Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 83kg
    Packed Weight 93kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 1.4A
    Refrigerant R134a
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 195W, Heater 192W, Refrigeration 222W Defrost 199W*
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $3,520.00 exc gst & delivery

    Add to Cart
  • RTE-170SDA-GN-ML SS3FP

    With no centre pillar you can use trays and containers of varying sizes. This Pillar Less range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Standard with 6 shelves / 3 doors. Programmable electronic controller and display. 2 years parts and labour warranty. Comes standard with 4 x lockable (115 mm) castors (not legs). Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless Steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 412L
    Temperature Control Microprocessor controlled Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1660mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 1290mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 103kg
    Packed Weight 115kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 1.4A
    Refrigerant R134a
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 195W (Power Factor 65%), Heater 202W, Refrigeration 242W, Defrost 209W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    $4,261.00 exc gst & delivery

    Add to Cart
  • B-301

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 559mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 37kg
    Packed Weight 49kg

     

    $1,269.00 exc gst & delivery

    Add to Cart
  • B-501

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 781mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 47kg
    Packed Weight 57kg

     

    $1,609.00 exc gst & delivery

    Add to Cart
  • B-801

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 1238mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 64kg
    Packed Weight 86kg

     

    $2,123.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button Single Auger Agitator
    Max Storage Capacity Approx. 91kg
    Width 762mm
    Depth 684mm
    Height 1346mm (Includes 152mm legs)
    Weight Net 85kg
    Packed Weight 130kg
    AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume 5.72 ft³
    Amperage Rated: 1.4A
    Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate 5.89 kg
    Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V

     

    $9,729.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200 H20

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button 2 Push Buttons – 1 x Ice & 1 x Water – Single Auger Agitator
    Max Storage Capacity Approx. 91kg
    Width 762mm
    Depth 684mm
    Height 1346mm (Includes 152mm legs)
    Weight Net 85kg
    Packed Weight 130kg
    AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume 5.72 ft³
    Amperage Rated: 1.4A
    Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate 5.89 kg
    Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V

     

    $10,418.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 120

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage Capacity Approx. 4kg
    Width 350mm
    Depth 585mm
    Height 815mm (Includes 152mm legs)
    Weight Net 57kg
    Packed Weight 66kg
    AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts: HLF10 water filter

     

    $6,472.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 60

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage Capacity Approx. 4kg
    Width 350mm
    Depth 585mm
    Height 815mm (Includes 152mm legs)
    Weight Net 57kg
    Packed Weight 66kg
    AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts: HLF10 water filter

     

    $6,011.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    FM-150 KE

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 150kg @10°C Air temp; 10°C Water Approx. 130kg @ 21°C Air temp; 15°C Water Approx. 110kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx.  26kg -Leveled
    Width 640mm
    Depth 600mm
    Height 803mm (Includes 70mm-110mm Legs)
    Weight Net 71kg
    Packed Weight 82kg
    Cooling

    AC Supply Voltage

    Air

    1 PHASE 220-240V 50Hz/ 10 AMP Plug

    Amperage

    Refrigerant Charge

    Running: 5.0A Starting: 20A

    R134a / 200g

    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10%
    Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,395.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    FM-150 KE-N

    • “Freeze Burn” is no longer an issue when displaying fresh fish or produce.
    • Carbon auger bearings have a longer life expectancy than roller bearing, reducing maintenance costs.
    • One piece bin moulding – rounded corners for hygiene and ease of cleaning.
    • Automatic flush function, helps keep the ice making system clean.
    • Integrated door handle for ease use and hygiene.
    • Controller board with Operational Status display assists in troubleshooting.
    • Due to the auger system, water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil.

    Production Capacity per 24hours Approx. 140kg @10°C Air temp; 10°C Water Approx. 120kg @ 21°C Air temp; 15°C Water Approx. 100kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx.  32kg
    Width 640mm
    Depth 600mm
    Height 803mm (Includes 70mm-110mm Legs)
    Weight Net 71kg
    Packed Weight 82kg
    Cooling

    AC Supply Voltage

    Air

    1 PHASE 220-240V 50Hz/ 10 AMP Plug

    Amperage

    Refrigerant Charge

    Running: 5.0A Starting: 20A

    R134a / 200g

    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10%
    Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,713.00 exc gst & delivery

    Add to Cart
  • All ice machines must have a filter installed, optional filter kit will be quoted on.

    IM-100CNE-28 SC

    • New intelligent control circuit dedicated to saving power and water consumption.
    • Micro computer controller controls ice making process to work at peak performance in any conditions.
    • Inbuilt safety features – freeze cycle back up timer, defrost back up, low voltage and high amp protector.
    • New 7 segment operational display panel for ease of use.
    • Unique closed cell water circuit for ultimate contamination protection.
    • Durable stainless steel exterior.
    • Easily accessible and cleanable air filters reduce costly callouts.
    • Exceptionally hard crystal clear cubes that melt slowly.
    • Auto rinse and flush cycle.
    • 3 year parts and labour warranty on entire unit, 5 year (parts only) on compressor and air cooled condenser coil.

    Production Capacity per 24hours Approx. 85kg @10°C Air temp; 10°C WaterApprox. 83kg @21°C Air temp; 15°C Water

    Approx. 73kg @32°C Air temp; 21°C Water

    Max Storage Capacity Approx. 38kg
    Freeze Cycle Time Approx. 29 Min
    Ice Production Per cycle Approx. 1.8kg/80pcs
    Width 1004mm
    Depth 600mm
    Height 800mm (Includes 90mm-125mm Legs)
    Weight Net 77kg
    Packed Weight 88kg
    Cooling Air
    AC Supply Voltage 1 PHASE 220-240V 50Hz/ 10 AMp Plug
    Amperage Running: 4.1A Rated: 4.1A Starting: 19A
    Refrigerant Charge R134a / 290g
    Operating Conditions Ambient Temp.: 1-40°CWater Supply Temp.: 5-35°CWater Supply Pressure: 0.07-0.8MPa (0.7-8bar)Voltage Range: Rated Voltage ±6%
    Additional Parts: 87000105 High capacity Water Filter System 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    $5,327.00 exc gst & delivery

    Add to Cart

Maintain a Healthy Lifestyle

Keep your water purified