shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • Sale!

    Frost H&C water cooler direct

    Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.

    • Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
    • Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
    • Hot Water Safety Lock: Provides safety assurance for users.

    Cold Water Supply
    		2-3L/H (≤10℃)
    Connection

    Heating Power
    Direct Connect
    550W
    Cooling Power
    		90W
    Filter Activated Carbon, PP Sediment
    Hot Water Supply  5L/H(≥90℃)
    Voltage 220V - 50Hz
    Weight 16kg
    Working Ambient
    		10 – 32℃

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $550.00.Current price is: $480.00. ex. GST

    13% Off

    Add to cart
  • Sale!

    Hoshizaki FT-126MA-A SS2FZ 231L

    FT-126MA-A SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 231L
    Temperature Control Microprocessor controlled Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 840mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 72kg
    Packed Weight 77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.6A
    Refrigerant R404A/160g
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 342W, Heater 371W, Defrost 330W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $4,692.00.Current price is: $3,100.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FT-186MA-A SS3FZ 401L

    FT-186MA-A SS3FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 401L
    Temperature Control Microprocessor adjustable from -23°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1800mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 1440mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 93kg
    Packed Weight 98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.7A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 357W, Heater 397W, Defrost 330W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,428.00.Current price is: $3,586.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTC-90DEA-GN-3D SS3DFZ 160L

    FTC-90DEA-GN-3D SS3DFZ

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 3 x Auto closing drawers.
    • Fits GN pans 100mm Deep.
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs)
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity 160L
    Temperature Control Microprocessor adjustable from -25°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 900mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm
    Inside Dimensions Width 530mm
    Inside Dimensions Depth 533mm
    Inside Dimensions Height 588mm
    Weight Net 86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 PHASE 220-240V 50Hz/10 Amp Plug
    Amperage Rated: 3.0A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Heater 362W, Defrost 362W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,670.00.Current price is: $5,068.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTE-120SD-GN SS2FZ 265L

    FTE-120SD-GN SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor adjustable from -25°C to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,270.83.Current price is: $3,483.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki FTE-120SDA-GN-ML SS2FZP 265L

    FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 265L
    Temperature Control Microprocessor controlled Adjustable from -25 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 830mm
    Inside Dimensions Depth 527mm
    Inside Dimensions Height 588mm
    Weight Net 87kg
    Packed Weight 97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.8A
    Refrigerant R404A/200g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,808.10.Current price is: $3,837.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki HF-128MA-A SS2UFZ 1047L

    HF-128MA-A SS2UFZ

    • Split doors and Upright series.
    • Stainless steel interior and exterior.
    • Programmable electronic controller and display.
    • Standard with 8 x shelves.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Top,Rear/Bottom)
    Max Storage Capacity 1047L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 1096mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 149kg
    Packed Weight 180kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.9A Starting: 15.6A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 700W, Heater 474W, Defrost 474W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,308.00.Current price is: $4,829.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki HR-78MA-A SS1FZsplit 569L

    HR-78MA-A SS1FZsplit

    • Stainless steel interior and exterior.
    • Split doors on Upright series.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Standard with 4 x shelves.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity 569L
    Temperature Control Microprocessor Adjustable from -23 to -7°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 700mm
    Outside Dimensions Depth 800mm
    Outside Dimensions Height 2015mm
    Inside Dimensions Width 596mm
    Inside Dimensions Depth 646mm
    Inside Dimensions Height 1484mm
    Weight Net 104kg
    Packed Weight 126kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 4.1A Starting:8.5A
    Refrigerant R404A
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 469W, Heater 426W, Defrost 426W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,292.00.Current price is: $3,497.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki RT-126MA-A SS2F 231L

    RT-126MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 231L
    Temperature Control Microprocessor controlled Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1200mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 840mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 71kg
    Packed Weight 76kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.0A
    Refrigerant R134a/240g
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 245W, Heater 187W, Defrost 165W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $4,513.82.Current price is: $2,982.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki RT-156MA-A SS2F 318L

    RT-156MA-A SS2F

    With no centre pillar you can use trays and containers of varying sizes. This Pillarless range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Programmable electronic controller and display. Includes: Shelf x 6, lockable (115mm) Castors (20mm thread) x 4, Spanner and Spacer (for castors). Sold Separately: Optional Adjustable legs 150-180mm.

    *electric consumption are based on measurements of ambient temperate of 38 and power supply of 230v 50hz

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 401L
    Temperature Control Microprocessor(Digital Temp Indication) Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1800mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm
    Inside Dimensions Width 1440mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 93kg
    Packed Weight 98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.1A
    Refrigerant R134A
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption  280W, Heater 201W, Defrost 165W*, (GEMS) kWh/24h – 4.48
    Shelf load Maximum loading of each shelf is 60 kg
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $4,885.78.Current price is: $3,228.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki RT-186MA-A SS2F 401L

    RT-186MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic (Doors)
    Exterior Stainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity 318L
    Temperature Control Microprocessor controlled Adjustable from -6 to -12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 1500mm
    Outside Dimensions Depth 600mm
    Outside Dimensions Height 815mm (Includes 115mm Castors)
    Inside Dimensions Width 1140mm
    Inside Dimensions Depth 436mm
    Inside Dimensions Height 599mm
    Weight Net 81kg
    Packed Weight 86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 2.0A
    Refrigerant R134a
    Operating Conditions Ambient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 245W, Heater 189W, Defrost 165W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $5,996.59.Current price is: $3,962.00. ex. GST

    34% Off

    Add to cart
  • Sale!

    Hoshizaki RTC-90DEA-GN-2D SS2DF 160L

    RTC-90DEA-GN-2D SS2DF

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 2 x Auto closing drawers.
    • Fits GN pans 150mm Deep
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    Interior Stainless Steel, ABS Plastic
    Exterior Stainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity 160L
    Temperature Control Microprocessor controlled Adjustable from -6 to 12°C
    Evaporator Fin & Tube type
    Outside Dimensions Width 900mm
    Outside Dimensions Depth 700mm
    Outside Dimensions Height 815mm
    Inside Dimensions Width 530mm
    Inside Dimensions Depth 533mm
    Inside Dimensions Height 588mm
    Weight Net 77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage 1 Phase 220-240V 50Hz/10Amp Plug
    Amperage Rated: 1.5A
    Refrigerant R134a/160g
    Operating Conditions Ambient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption Heater 181W, Defrost 181W
    Additional Parts 95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $7,355.38.Current price is: $4,860.00. ex. GST

    34% Off

    Add to cart

Maintain a Healthy Lifestyle

Keep your water purified