shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • FT-126MA-A SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity231L
    Temperature ControlMicroprocessor controlled Adjustable from -23 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width840mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net72kg
    Packed Weight77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.6A
    RefrigerantR404A/160g
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption342W, Heater 371W, Defrost 330W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $4,692.00.Current price is: $3,100.00. ex. GST

    34% Off

    Add to cart
  • FT-186MA-A SS3FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity401L
    Temperature ControlMicroprocessor adjustable from -23°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1800mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width1440mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net93kg
    Packed Weight98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.7A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption357W, Heater 397W, Defrost 330W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,428.00.Current price is: $3,586.00. ex. GST

    34% Off

    Add to cart
  • FTC-90DEA-GN-3D SS3DFZ

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 3 x Auto closing drawers.
    • Fits GN pans 100mm Deep.
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs)
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity160L
    Temperature ControlMicroprocessor adjustable from -25°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width900mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm
    Inside Dimensions Width530mm
    Inside Dimensions Depth533mm
    Inside Dimensions Height588mm
    Weight Net86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 PHASE 220-240V 50Hz/10 Amp Plug
    AmperageRated: 3.0A
    RefrigerantR404A/200g
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionHeater 362W, Defrost 362W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $7,670.00.Current price is: $5,068.00. ex. GST

    34% Off

    Add to cart
  • FTE-120SD-GN SS2FZ

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity265L
    Temperature ControlMicroprocessor adjustable from -25°C to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width830mm
    Inside Dimensions Depth527mm
    Inside Dimensions Height588mm
    Weight Net87kg
    Packed Weight97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.8A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionMotor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,270.83.Current price is: $3,483.00. ex. GST

    34% Off

    Add to cart
  • FTE-120SDA-GN-ML SS2FZP

    • With no centre pillar you can use trays and containers of varying sizes.
    • This Pillar Less range is perfect for kitchens looking to maximise their food storage.
    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity265L
    Temperature ControlMicroprocessor controlled Adjustable from -25 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width830mm
    Inside Dimensions Depth527mm
    Inside Dimensions Height588mm
    Weight Net87kg
    Packed Weight97kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.8A
    RefrigerantR404A/200g
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionMotor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,808.10.Current price is: $3,837.00. ex. GST

    34% Off

    Add to cart
  • HF-128MA-A SS2UFZ

    • Split doors and Upright series.
    • Stainless steel interior and exterior.
    • Programmable electronic controller and display.
    • Standard with 8 x shelves.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Top,Rear/Bottom)
    Max Storage Capacity1047L
    Temperature ControlMicroprocessor Adjustable from -23 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth800mm
    Outside Dimensions Height2015mm
    Inside Dimensions Width1096mm
    Inside Dimensions Depth646mm
    Inside Dimensions Height1484mm
    Weight Net149kg
    Packed Weight180kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 4.9A Starting: 15.6A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption700W, Heater 474W, Defrost 474W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $7,308.00.Current price is: $4,829.00. ex. GST

    34% Off

    Add to cart
  • HR-78MA-A SS1FZsplit

    • Stainless steel interior and exterior.
    • Split doors on Upright series.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Standard with 4 x shelves.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity569L
    Temperature ControlMicroprocessor Adjustable from -23 to -7°C
    EvaporatorFin & Tube type
    Outside Dimensions Width700mm
    Outside Dimensions Depth800mm
    Outside Dimensions Height2015mm
    Inside Dimensions Width596mm
    Inside Dimensions Depth646mm
    Inside Dimensions Height1484mm
    Weight Net104kg
    Packed Weight126kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 4.1A Starting:8.5A
    RefrigerantR404A
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption469W, Heater 426W, Defrost 426W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,292.00.Current price is: $3,497.00. ex. GST

    34% Off

    Add to cart
  • RT-126MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity231L
    Temperature ControlMicroprocessor controlled Adjustable from -6 to 12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width840mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net71kg
    Packed Weight76kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.0A
    RefrigerantR134a/240g
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption245W, Heater 187W, Defrost 165W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $4,513.82.Current price is: $2,982.00. ex. GST

    34% Off

    Add to cart
  • RT-156MA-A SS2F

    With no centre pillar you can use trays and containers of varying sizes. This Pillarless range is perfect for kitchens looking to maximise their food storage. Complete with stainless steel top. Programmable electronic controller and display. Includes: Shelf x 6, lockable (115mm) Castors (20mm thread) x 4, Spanner and Spacer (for castors). Sold Separately: Optional Adjustable legs 150-180mm.

    *electric consumption are based on measurements of ambient temperate of 38 and power supply of 230v 50hz

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity401L
    Temperature ControlMicroprocessor(Digital Temp Indication) Adjustable from -6 to 12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1800mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm
    Inside Dimensions Width1440mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net93kg
    Packed Weight98kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.1A
    RefrigerantR134A
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption 280W, Heater 201W, Defrost 165W*, (GEMS) kWh/24h – 4.48
    Shelf loadMaximum loading of each shelf is 60 kg
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $4,885.78.Current price is: $3,228.00. ex. GST

    34% Off

    Add to cart
  • RT-186MA-A SS2F

    • Complete with stainless steel top.
    • Standard with 4 shelves / 2 doors.
    • Programmable electronic controller and display.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x lockable (115 mm) castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic (Doors)
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom), ABS plastic (Top & Bottom on Door)
    Max Storage Capacity318L
    Temperature ControlMicroprocessor controlled Adjustable from -6 to -12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1500mm
    Outside Dimensions Depth600mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width1140mm
    Inside Dimensions Depth436mm
    Inside Dimensions Height599mm
    Weight Net81kg
    Packed Weight86kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 2.0A
    RefrigerantR134a
    Operating ConditionsAmbient Temp.: 5-38°C Voltage Range: Rated Voltage ±6%
     Electrical Consumption245W, Heater 189W, Defrost 165W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,996.59.Current price is: $3,962.00. ex. GST

    34% Off

    Add to cart
  • RTC-90DEA-GN-2D SS2DF

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 2 x Auto closing drawers.
    • Fits GN pans 150mm Deep
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 115mm lockable castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately).

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless Steel, Galvanized Steel (Rear /Bottom)
    Max Storage Capacity160L
    Temperature ControlMicroprocessor controlled Adjustable from -6 to 12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width900mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm
    Inside Dimensions Width530mm
    Inside Dimensions Depth533mm
    Inside Dimensions Height588mm
    Weight Net77kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 1.5A
    RefrigerantR134a/160g
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionHeater 181W, Defrost 181W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $7,355.38.Current price is: $4,860.00. ex. GST

    34% Off

    Add to cart
  • RTE-120SDA-GN SS2F

    • Stainless steel interior and exterior.
    • Programmable Digital controller and display.
    • 4 x 1/1 Gastronorm adjustable shelves with rails
    • Compact slide out refrigeration unit for quick maintenance.
    • 2 years parts and labour warranty.
    • Comes standard with 4 x 115mm lockable castors (not legs).
    • Optional Adjustable legs 150 – 180mm (Sold separately)

    InteriorStainless Steel, ABS Plastic
    ExteriorStainless steel, Galvanized Steel (Rear/Bottom)
    Max Storage Capacity265L
    Temperature ControlMicroprocessor controlled Adjustable from -6 to 12°C
    EvaporatorFin & Tube type
    Outside Dimensions Width1200mm
    Outside Dimensions Depth700mm
    Outside Dimensions Height815mm (Includes 115mm Castors)
    Inside Dimensions Width830mm
    Inside Dimensions Depth527mm
    Inside Dimensions Height588mm
    Weight Net83kg
    Packed Weight93kg
    Refrigeration System
    Forced Air Circulation
    AC Supply Voltage1 Phase 220-240V 50Hz/10Amp Plug
    AmperageRated: 1.4A
    RefrigerantR134a
    Operating ConditionsAmbient Temp.: 5-43°C Voltage Range: Rated Voltage ±6%
     Electrical ConsumptionMotor 195W (Power Factor 60%), Heater 192W, Refrigeration 222W, Defrost 199W
    Additional Parts95001013 Adjustable Leg 95002993 Adjustable Leg 79001076 Castor Grey 180mm (each)

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Original price was: $5,286.96.Current price is: $3,493.00. ex. GST

    34% Off

    Add to cart

Maintain a Healthy Lifestyle

Keep your water purified