shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • Sale!

    Frost 20L Rust free Drinking Fountain

     

    • Efficient Cooling: The hygienic rust-free tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

    Cold Water Supply
    		20L/H (8-12°C)     |
    Cold Water Temp
    8-12°C
    Cooling Power
    		200W
    Filter Activated Carbon, PP Sediment
    Refrigerant  R290 60g
    Measurements 99cm H x 30cm W x 30cm D
    Bubbler Height 7cm
    Tap Height
    		25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Sale!

    Frost 20L SS Cylinder Drinking Fountain

    Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.

    Cold Water Supply
    		20L/H(8-12°C)
    Cold Water Temp
    8-12°C
    Material
    		Stainless Steel SUS304
    Power Supply 220-240V / 50-60Hz
    Refrigerant  R290 60g
    Bubbler Height 7cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Sale!

    Frost 20L SS Square Drinking Fountain

    Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Filtered Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

     

    Cold Water Supply
    		20L/H (8-12°C)
    Cold Water Temp
    8-12°C
    Cooling Power
    		200W
    Filter Activated Carbon, PP Sediment
    Material Stainless Steel SUS304
    Measurements 99cm H x 30cm W x 30cm D
    Bubbler Height 7cm
    Tap Height
    		25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Sale!

    Frost H&C water cooler direct

    Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.

    • Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
    • Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
    • Hot Water Safety Lock: Provides safety assurance for users.

    Cold Water Supply
    		2-3L/H (≤10℃)
    Connection

    Heating Power
    Direct Connect
    550W
    Cooling Power
    		90W
    Filter Activated Carbon, PP Sediment
    Hot Water Supply  5L/H(≥90℃)
    Voltage 220V - 50Hz
    Weight 16kg
    Working Ambient
    		10 – 32℃

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $550.00.Current price is: $480.00. exc gst & delivery

    13% Saving

    Add to Cart

  • Hoshizaki B-301 Ice Bin 144kg

    B-301

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 559mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 37kg
    Packed Weight 49kg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $1,269.00 exc gst & delivery

    Add to Cart

  • Hoshizaki B-501 Ice Bin 217kg

    B-501

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 781mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 47kg
    Packed Weight 57kg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $1,609.00 exc gst & delivery

    Add to Cart

  • Hoshizaki B-801 Ice Bin 348kg

    B-801

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width 1238mm
    Depth 820mm
    Height 1168mm (Dimensions include 152mm legs)
    Weight Net 64kg
    Packed Weight 86kg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $2,123.00 exc gst & delivery

    Add to Cart

  • Hoshizaki DB 200 Ice Dispenser 90kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button Single Auger Agitator
    Max Storage Capacity Approx. 91kg
    Width 762mm
    Depth 684mm
    Height 1346mm (Includes 152mm legs)
    Weight Net 85kg
    Packed Weight 130kg
    AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume 5.72 ft³
    Amperage Rated: 1.4A
    Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate 5.89 kg
    Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $9,729.00 exc gst & delivery

    Add to Cart

  • Hoshizaki DB 200 Ice Dispenser H20 90kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200 H20

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button 2 Push Buttons – 1 x Ice & 1 x Water – Single Auger Agitator
    Max Storage Capacity Approx. 91kg
    Width 762mm
    Depth 684mm
    Height 1346mm (Includes 152mm legs)
    Weight Net 85kg
    Packed Weight 130kg
    AC Supply Voltage 1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume 5.72 ft³
    Amperage Rated: 1.4A
    Compatible Select Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate 5.89 kg
    Operating Conditions Ambient Temp.: 7-38CVoltage Range:104-132V

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $10,418.00 exc gst & delivery

    Add to Cart

  • Hoshizaki DCM 120 Ice and Water dispenser 105kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 120

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage Capacity Approx. 4kg
    Width 350mm
    Depth 585mm
    Height 815mm (Includes 152mm legs)
    Weight Net 57kg
    Packed Weight 66kg
    AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts: HLF10 water filter

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $6,472.00 exc gst & delivery

    Add to Cart

  • Hoshizaki DCM 60 Ice and Water dispenser 50kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 60

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage Capacity Approx. 4kg
    Width 350mm
    Depth 585mm
    Height 815mm (Includes 152mm legs)
    Weight Net 57kg
    Packed Weight 66kg
    AC Supply Voltage 1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant Charge Rated: 2.8 / 2.7 A Starting: 12.6 A
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts: HLF10 water filter

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $6,011.00 exc gst & delivery

    Add to Cart

  • Hoshizaki FM-150 KE Flaker 130kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    FM-150 KE

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hours Approx. 150kg @10°C Air temp; 10°C Water Approx. 130kg @ 21°C Air temp; 15°C Water Approx. 110kg @ 32°C Air temp; 21°C Water
    Max Storage Capacity Approx.  26kg -Leveled
    Width 640mm
    Depth 600mm
    Height 803mm (Includes 70mm-110mm Legs)
    Weight Net 71kg
    Packed Weight 82kg
    Cooling

    AC Supply Voltage

    		 Air

    1 PHASE 220-240V 50Hz/ 10 AMP Plug
    Amperage

    Refrigerant Charge

    		 Running: 5.0A Starting: 20A

    R134a / 200g
    Operating Conditions Ambient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10%
    Additional Parts: 87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    $5,395.00 exc gst & delivery

    Add to Cart

Maintain a Healthy Lifestyle

Keep your water purified