shop with the ultimate water solutions store!

Peruse our beautiful range of classy products.

Filter your Search

  • Sale!
    rust free water fountain cooler 1

    Frost 20L Rust free Drinking Fountain

     

    • Efficient Cooling: The hygienic rust-free tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

    Cold Water Supply
    		20L/H (8-12°C)     |
    Cold Water Temp
    8-12°C
    Cooling Power
    		200W
    FilterActivated Carbon, PP Sediment
    Refrigerant R290 60g
    Measurements99cm H x 30cm W x 30cm D
    Bubbler Height7cm
    Tap Height
    		25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Sale!
    circular bubbler

    Frost 20L SS Cylinder Drinking Fountain

    Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.

    Cold Water Supply
    		20L/H(8-12°C)
    Cold Water Temp
    8-12°C
    Material
    		Stainless Steel SUS304
    Power Supply220-240V / 50-60Hz
    Refrigerant R290 60g
    Bubbler Height7cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Sale!
    Stainless bubbler fountain

    Frost 20L SS Square Drinking Fountain

    Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Filtered Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.

    • Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
    • Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
    • Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
    • User-Friendly: Equipped with two faucets, allowing direct drinking from the bubbler or filling a cup with filtered cold water.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).

     

    Cold Water Supply
    		20L/H (8-12°C)
    Cold Water Temp
    8-12°C
    Cooling Power
    		200W
    FilterActivated Carbon, PP Sediment
    MaterialStainless Steel SUS304
    Measurements99cm H x 30cm W x 30cm D
    Bubbler Height7cm
    Tap Height
    		25cm

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,450.00.Current price is: $1,200.00. exc gst & delivery

    17% Saving

    Add to Cart
  • Sale!
    cooler direct connect

    Frost H&C water cooler direct

    Upgrade your hydration experience with our Hot & Cold Filtered Water Cooler. Designed for both home and office use, this sleek unit provides immediate access to hot and cold filtered water, eliminating the need for bottled water and reducing environmental impact.

    • Direct Connect: Seamlessly integrates with your existing water supply for an uninterrupted water source.
    • Dual Temperature: Enjoy both hot and cold water at your fingertips, perfect for beverages and instant meals.
    • Inline Filtration System: Ensures clean, great-tasting water by removing impurities with quick change Sediment and Carbon Cartridges (included).
    • Hot Water Safety Lock: Provides safety assurance for users.

    Cold Water Supply
    		2-3L/H (≤10℃)
    Connection

    Heating Power

    Direct Connect
    550W
    Cooling Power
    		90W
    FilterActivated Carbon, PP Sediment
    Hot Water Supply 5L/H(≥90℃)
    Voltage220V - 50Hz
    Weight16kg
    Working Ambient
    		10 – 32℃

    Unpack

    1. After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
    2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.

    Install

    1. Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
    2. Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
    3. Place water bottle on top of unit and allow tank to fill.
    4. Hold down the taps until a steady stream of water comes from the tap.
    5. Check all connections for water leaks.
    6. Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
    7. Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $550.00.Current price is: $480.00. exc gst & delivery

    13% Saving

    Add to Cart
  • Sale!
    B 301 SA 1

    Hoshizaki B-301 Ice Bin 144kg

    B-301

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width559mm
    Depth820mm
    Height1168mm (Dimensions include 152mm legs)
    Weight Net37kg
    Packed Weight49kg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $1,925.28.Current price is: $1,272.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    B 501 SA

    Hoshizaki B-501 Ice Bin 217kg

    B-501

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width781mm
    Depth820mm
    Height1168mm (Dimensions include 152mm legs)
    Weight Net47kg
    Packed Weight57kg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $2,441.38.Current price is: $1,613.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    B 801 SA

    Hoshizaki B-801 Ice Bin 348kg

    B-801

    • Seamless polyethylene bin liner for sanitary storage.
    • Sealed door gasket reduces risk of airborne bacteria.
    • Easy cleaning and long lasting attractive appearance.
    • View windows provide instant inspection and thermal break.
    • Pouch style insulated door prevents condensation while providing maximum access and minimal spillage.

    Width1238mm
    Depth820mm
    Height1168mm (Dimensions include 152mm legs)
    Weight Net64kg
    Packed Weight86kg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $3,220.56.Current price is: $2,128.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    DB 200H Worksite

    Hoshizaki DB 200 Ice Dispenser 90kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push ButtonSingle Auger Agitator
    Max Storage CapacityApprox. 91kg
    Width762mm
    Depth684mm
    Height1346mm (Includes 152mm legs)
    Weight Net85kg
    Packed Weight130kg
    AC Supply Voltage1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume5.72 ft³
    AmperageRated: 1.4A
    CompatibleSelect Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate5.89 kg
    Operating ConditionsAmbient Temp.: 7-38CVoltage Range:104-132V

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $14,952.00.Current price is: $9,879.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    DB 200H Worksite H20

    Hoshizaki DB 200 Ice Dispenser H20 90kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DB 200 H20

    • Produce more quality ice.
    • Crystal clear, hard individual uniquely shaped Crescent cubes that last longer in drinks.
    • Use less energy.
    • Cycle 1/2 as many times as competition.
    • Cubes do not clump together in storage bins.
    • Unique stainless steel evaporator design which is unaffected by caustic water, harsh cleaning agents and does not crack or peel like nickel plated evaporators.
    • Long life stainless steel construction.
    • Inbuilt, removable, easily cleaned, reusable air filters.

    Push Button2 Push Buttons – 1 x Ice & 1 x Water – Single Auger Agitator
    Max Storage CapacityApprox. 91kg
    Width762mm
    Depth684mm
    Height1346mm (Includes 152mm legs)
    Weight Net85kg
    Packed Weight130kg
    AC Supply Voltage1 PHASE 240V/ 50Hz/10 Amp Plug
    Capacity Volume5.72 ft³
    AmperageRated: 1.4A
    CompatibleSelect Modular Head unit KMD-201AB,KMD-270AB or KM-660MAJ-E or KM-470AJ-S & Top Kit (SoldSeparately)
    Dispensing Rate5.89 kg
    Operating ConditionsAmbient Temp.: 7-38CVoltage Range:104-132V

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $15,792.00.Current price is: $10,434.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    DCM 120KE P

    Hoshizaki DCM 120 Ice and Water dispenser 105kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 120

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hoursApprox. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage CapacityApprox. 4kg
    Width350mm
    Depth585mm
    Height815mm (Includes 152mm legs)
    Weight Net57kg
    Packed Weight66kg
    AC Supply Voltage1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant ChargeRated: 2.8 / 2.7 A Starting: 12.6 A
    Operating ConditionsAmbient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts:HLF10 water filter

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $10,104.19.Current price is: $6,676.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    DCM 120KE P 2

    Hoshizaki DCM 60 Ice and Water dispenser 50kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    DCM 60

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hoursApprox. 125kg @10°C Air temp; 10°C Water Approx. 105kg @ 21°C Air temp; 15°C water Approx. 85kg @ 32°C Air temp; 21°C water
    Max Storage CapacityApprox. 4kg
    Width350mm
    Depth585mm
    Height815mm (Includes 152mm legs)
    Weight Net57kg
    Packed Weight66kg
    AC Supply Voltage1 PHASE 220 – 240V / 50Hz / 10 AMP Plug
    Refrigerant ChargeRated: 2.8 / 2.7 A Starting: 12.6 A
    Operating ConditionsAmbient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.07-0.8MPa Voltage Range: Rated Voltage ±6%
    Additional Parts:HLF10 water filter

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $9,385.49.Current price is: $6,201.00. exc gst & delivery

    34% Saving

    Add to Cart
  • Sale!
    FM 150KE Web

    Hoshizaki FM-150 KE Flaker 130kg

    All ice machines must have a filter installed, optional filter kit will be quoted on.

    FM-150 KE

    • Premium Cubelet ice
    • Smooth ice dispense
    • No ice bridging
    • Robust and reliable
    • Sanitary self-service application
    • Easy operation – Push button; dispense ice directly in to container greatly reducing risk of contamination
    • Dispenses ice only. water only or ice and water
    • Adjustable portion controlled dispensing
    • Due to Auger system water consumption is equal to ice production.
    • 2 year parts & labour on entire unit, 5 year (parts only) on compressor & air cooled condenser coil

    Production Capacity per 24hoursApprox. 150kg @10°C Air temp; 10°C Water Approx. 130kg @ 21°C Air temp; 15°C Water Approx. 110kg @ 32°C Air temp; 21°C Water
    Max Storage CapacityApprox.  26kg -Leveled
    Width640mm
    Depth600mm
    Height803mm (Includes 70mm-110mm Legs)
    Weight Net71kg
    Packed Weight82kg
    Cooling

    AC Supply Voltage

    		Air

    1 PHASE 220-240V 50Hz/ 10 AMP Plug

    Amperage

    Refrigerant Charge

    		Running: 5.0A Starting: 20A

    R134a / 200g

    Operating ConditionsAmbient Temp.: 5-40°C Water Supply Temp.: 5-35°C Water Supply Pressure: 0.05-0.8MPa Voltage Range: Rated Voltage ±10%
    Additional Parts:87000105 High capacity Water Filter System 87000107 450mm Replacement Cartridge 87000149 Water Filter System & Guage 81000116 Stainless Steel Hose 95001013 Adjustable Leg

     

    Data_Sheet User_Manual Drinking_Water_Solutions

    Original price was: $8,422.85.Current price is: $5,565.00. exc gst & delivery

    34% Saving

    Add to Cart

Maintain a Healthy Lifestyle

Keep your water purified