Frost 20L SS Cylinder Drinking Fountain
Ensure reliable access to refreshing, cold water with our Commercial Stainless Steel Cold Water Bubbler. Crafted from premium SUS304 stainless steel, this water cooler fountain is built to withstand the demands of busy environments while maintaining the highest standards of hygiene.
- Efficient Cooling: The hygienic stainless-steel tank provides a cooling capacity of 20 liters per hour, maintaining water temperatures between 8-12°C.
- Hygienic Design: The integrated drip tray features a drainage system to prevent water accumulation and ensure cleanliness.
- Durable Construction: All SUS304 stainless steel welded frame and exterior panels ensure longevity and resistance to corrosion.
|
|
20L/H(8-12°C) |
| Cold Water Temp |
|
|
|
Stainless Steel SUS304 |
| Power Supply |
220-240V / 50-60Hz |
| Refrigerant |
R290 60g |
| Bubbler Height |
7cm |
|
|
|
|
|
Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$1,450.00 Original price was: $1,450.00.$1,200.00Current price is: $1,200.00. exc gst & delivery
17% Saving
