Hoshizaki FTE-120SDA-GN-ML SS2FZP 265L
FTE-120SDA-GN-ML SS2FZP
- With no centre pillar you can use trays and containers of varying sizes.
- This Pillar Less range is perfect for kitchens looking to maximise their food storage.
- Complete with stainless steel top.
- Standard with 4 shelves / 2 doors.
- Programmable electronic controller and display.
- 2 years parts and labour warranty.
- Comes standard with 4 x lockable (115 mm) castors (not legs).
- Optional Adjustable legs 150 – 180mm (Sold separately).
| Interior |
Stainless Steel, ABS Plastic |
| Exterior |
Stainless steel, Galvanized Steel (Rear/Bottom) |
| Max Storage Capacity |
265L |
| Temperature Control |
Microprocessor controlled Adjustable from -25 to -7°C |
| Evaporator |
Fin & Tube type |
Outside Dimensions
Width |
1200mm |
Outside Dimensions
Depth |
700mm |
Outside Dimensions
Height |
815mm
(Includes 115mm Castors) |
Inside Dimensions
Width |
830mm |
Inside Dimensions
Depth |
527mm |
Inside Dimensions
Height |
588mm |
| Weight Net |
87kg |
| Packed Weight |
97kg |
| Refrigeration System |
|
| AC Supply Voltage |
1 Phase 220-240V 50Hz/10Amp Plug |
| Amperage |
Rated: 2.8A |
| Refrigerant |
R404A/200g |
| Operating Conditions |
Ambient Temp.: 5-43°C
Voltage Range: Rated Voltage ±6% |
| Electrical Consumption |
Motor 460W (Power Factor 74%), Heater 371W, Refrigeration 501W, Defrost 365W |
| Additional Parts |
95001013 Adjustable Leg
95002993 Adjustable Leg
79001076 Castor Grey 180mm (each) |
Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
- Follow the instructions for setting up the Tri-Stage Refillable Bottle on the product page here.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the fountain.
- Place water bottle on top of unit and allow tank to fill.
- Hold down the taps until a steady stream of water comes from the tap.
- Check all connections for water leaks.
- Flush fresh water through unit for five minutes to ensure any residual water from testing is cleared.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch to the ON position. The first time the water cooler is used, you will have to wait at least 45 minutes for cold and hot water.
$3,520.00 exc gst & delivery
